PCB failures (Such as Seagate PCB 100574451<\/b>) affect thousands of hard drives every year and often result in permanent data loss. A hard drive may suddenly fail to power on, and a computer may not detect that it is plugged in. Some failed hard drives will also show up in computer BIOS with incorrect brand\/model information. PCB failures can also cause physical issues such as read\/write head failures, and many PCB failure symptoms overlap with the symptoms of other physical hard drive issues.<\/p>\n
Some emails from customers of Seagate PCB 100574451 failures are listed below, along with tips for replacing & repairing.<\/p>\n
Q: 7200.12 ST31000524AS Cannot Access Terminal<\/b><\/p>\n
Drive Details: SEAGATE BARRACUDA 7200.12 ST31000524AS 1TB P\/N: 9YP154-516 Firmware: JC45 PCB: 100574451 REV B The drive spins up and sounds like it is initialising correctly, but remains in a BSY state. It gives several LED error codes, but the first one that is shown is ‘LED: 000000CC FAddr: 000075A5’, so I was hoping to try the ‘Solution for the “HDD Lock (LED: 000000CC)” Problem’. However, I cannot access …<\/p>\n
Q: Shorting points for 7200.12 PCB 100574451 Rev B<\/b><\/p>\n
i want to know where the shorting points for this PCB are? Thanks<\/p>\n
Q: ST31000524AS Barracuda 7200.12<\/b><\/p>\n
Hi, I have the above harddisk. Firmware : JC45. P\/N:9YP154-516.. The PCB is 100574451 Rev A. The harddisk can be detected by PC3K when powered on. But when I tried to go to Data Extractor, the harddisk becomes BSY. Do I need to short any points in the PCB? Thanks. Regards. Goh<\/p>\n
Q: Shorting points for 7200.12 PCB 100574451 Rev A<\/b><\/p>\n
I have an ST3750528AS and want to know where the shorting points for this PCB are? Thanks<\/p>\n
Q: Considering Recovery of Seagate 7200.12 HDD<\/b><\/p>\n
re-ripping of my entire CD library) But it’s definitely not worth $600 to $2000 to me The drive specs are Seagate Barracuda 720012 1000 GB Model ST31000528AS Part 9SL154-022 Firmware HP35 (from an HP MediaSmart Server – OEM firmware) PCB 100574451 REV A PCB Sticker 8552 C I know enough to know that it could be the PCB or the “firmware” that’s stored on the platters I also know enough to know the price of quality and people who know what they’re doing I’ve found PCB replacements <\/p>\n
Q: i need help for ST31000528AS<\/b><\/p>\n
Model: ST31000528ASPcb: 100574451 REVBi need to find short points on pcb. any advice pls.Best Regards<\/p>\n
Q: Seagate Barracuda 7200.12 Clicking 11 times<\/b><\/p>\n
turn on with no boot device and the audible clicking sound of death A little reading into it , my HDD clicks 11 times powering up then powers down have tried to change SATA cables SEAGATE BARRACUDA 720012 ST31000524AS FIRMWARE JC4B PCB 100574451 REV B Can anyone suggest test’s that i can carry out to help diagnose the fault Thanks in Advance<\/p>\n
Q: media controller board and PCB board the same thing?<\/b><\/p>\n
replaced since there is a Controller Failure on my drive and wanted $900 for it Is that the same thing as replacing a PCB board? I found a few vendors online that would replace a PCB board with rom reprogramming (PCB Sticker 6222 M, PCB Number 100574451 REV B) for a lot cheaper I think there is only one board on this drive so thus I want to confirm the media controller board is the same as the PCB board Also, if anyone can suggest an alternative reputable vendor in the US (I’m in <\/p>\n
Q: SEAGATE ST31000524AS – JC4A<\/b><\/p>\n
PCB : 100574451 REV BI have 3 hd of this model and in principle with the same symptom. it hits the head and the engine stops.It does not give me output per terminal. I have another with another plate model and if it gives me output per terminal.I could try loading the virtualloader and the loader but I can not find them.Any ideas. Thank you.<\/p>\n
To repair a failure board, the simple way is swapping the failure board with a replacement board. Donor boards on HardDriveParts.com are listed below:<\/p>\n
PCB failures (Such as Seagate PCB 100574451) affect thousands of hard drives every year and often result in permanent data loss. A hard drive may suddenly fail to power on, and a computer may not detect that it is plugged in. Some failed hard drives will also show up in computer BIOS with incorrect brand\/model information. PCB failures can also cause physical issues such as read\/write head failures, and many PCB failure symptoms overlap with the symptoms of other physical…<\/p>\n