PCB failures (Such as WD PCB 2060-701567-*** (2061-701567-***)) affect thousands of hard drives every year and often result in permanent data loss. A hard drive may suddenly fail to power on, and a computer may not detect that it is plugged in. Some failed hard drives will also show up in computer BIOS with incorrect brand/model information. PCB failures can also cause physical issues such as read/write head failures, and many PCB failure symptoms overlap with the symptoms of other physical hard drive issues.

Some emails from customers of WD PCB 2060-701567 failures are listed below, along with tips for replacing & repairing.

WD PCB 2060-701567 Failures:

Q: Trying to find a replacement logic board for WD drive.

that I need those three values? Western Digital 10 TB SATA / 32MB CACHE WD1001FALS S/N ************ MDL WD1001FALS – 00J7B0 <================== WWN 50014EE000B15357 DATE 18 JUN 2008 DCM HBRNNV2AB <==================== LBA 1953525168 R/N 701567 PRODUCT OF MALAYSIA <======================= CANADA ICES - 003 CLASS B/ NMB - 003 CLASSE B If not, could anyone please clarify on what needs to sync up? Also, does anyone know of a source or vendor that might deel in these sorts of specific

Q: WD7501AALS – 750GB SATA – Circuit Board – Please help.

caps I exactly need to replace both of these caps that I snapped off These are the caps that I snapped off LG 9BA M AE 02A M Here’s a website that shows the exact picture of my hard drive’s circuit board wwwdrivestarorg/product/pcb_wd/701567htm Also, I was quoted $300 for the recovery (not including shipping + where they will store data) And I cannot afford this, especially when I have to ship the hard drive, and not see the recovery in person And swapping the circuit board will

Q: Marvell PCB Alternatives

Some times you can’t find the same pcb number for WD so you can use one of these alternates ?************************************Notes: all these alternatives pcb are tested *************************************1-701590 you can use 7015372-771590 you can use 7015903-701267 you can use 701266 rom swap needed4-701567 you can use 701537.5-701596 you can use 701590 or can use 7015376-701477 you can use 701444

Q: WD1001FALS clicking noise, failure to start

(more than not enough since I don’t know what most acronyms means) Front sticker – S/N WMATV0501506 MDL WD1001FALS-00J7B0 WWN 50014EE001032AB8 Date 18 dec 2008 DCM HANNHV2AB LBA 1953525168 5VDC 068A 12VDC 055A R/N 701567 Product of Malaysia NMB 003 Classe B WDT 701567 (B) Back PCB – Sticker 2061-701567-400AC XW 6T09 1YMX 6 0006250 9256 Engraved 2060-701567-000 rev A Thanks for any help you can offers!

Q: WD 6401AALS PCB ICs swap service required

Hi there, I have two fried PCBs of 2x wd 6401AALS black edition that were working on a Raid1 config Board Number 2060-701567-000 Main Controller IC 88i8845E-BHY2 HDD Motor Combo IC L7251 22 Western Digital PCB 2060-701567-000 I have got the replacement donor PCBs available ail but have no idea how to replace the main controller (BGA) from the original to donor PCB or swap the Motor controller which is damaged from the donor

Q: WD6401AALS PCB adaptation

I have two fried PCBs of 2x wd 6401AALS black edition that were working on a Raid1 config Board Number 2060-701567-000 Main Controller IC 88i8845E-BHY2 HDD Motor Combo IC L7251 22 Western Digital PCB 2060-701567-000 I have got the replacement donor PCBs and require a PCB adaptation service The SMOOTH chip is damaged on the side that drives the spindle motor The side that controls the board’s switchmode power supplies,

Q: WD RE3 broke! (Please! Help!)

days and then at a local store I found a disk with very close codes Here they are BROKEN HDD WD RE3 SATA / 32MB Cache WD1002FBYS S/NWMATV3699484 MDL WD1002FBYS-02A6B0 WWN 50014EE001AC96E1 DATE 10 OCT 2009 DCM HARNHT2AA LBA 1953525168 R/N 701567 CODES ON PCB 2060-701567-000 REV A STICKER CODES 2061-701567-400 AD XW 6T12 AC5B 5 0005120 0125 WORKING HDD WD RE3 SATA / 32MB Cache WD1002FBYS S/N WMATV4619991 MDL WD1002FBYS-02A6B0 WWN 50014EE057293502 DATE 29 NOV 2009 DCM HBNNHT2CA

Q: Quick question about Western Digital doner drive candidate

a little to far away from the date My repair shop told me they should be as close to the manufacture date of the original drive as possible! Specs of the damaged one MDL WD5001AALS-00J7B0 DATE 21 May 2010 DCM HBRNNT2AB DCX 8003J7T75 R/N 701567 Country of Origin Malaysia Donor 1 MDL WD5001AALS-00J7B0 DATE 28 March 2010 DCM HARNNT2AB DCX 2009J6R72 R/N 771591 Country of Origin Malaysia Donor 2 MDL WD5001AALS-00J7B0 DATE 29 March 2010 DCM HBRNNT2CA DCX 4002J6R78 R/N 701567

Replacement WD PCB 2060-701567:

To repair a failure board, the simple way is swapping the failure board with a replacement board. Donor boards on HardDriveParts.com are listed below:

• WD WD10EALS PCB Board 2060-701567-000
• WD1001FALS WD PCB Circuit Board 2060-701567-000
• WD1002FBYS WD PCB Circuit Board 2060-701567-000
• WD5001AALS WD PCB Circuit Board 2060-701567-000
• WD6401AALS WD PCB Circuit Board 2060-701567-000
• WD7501AALS WD PCB Circuit Board 2060-701567-000
• WD7502ABYS WD PCB Circuit Board 2060-701567-000
• Western Digital PCB Board 2060-701567-000 REV A / P1