WD PCB 2060-701675 Failure

WD PCB 2060-701675 Failure

PCB failures (Such as WD PCB 2060-701675-*** (2061-701675-***)) affect thousands of hard drives every year and often result in permanent data loss. A hard drive may suddenly fail to power on, and a computer may not detect that it is plugged in. Some failed hard drives will also show up in computer BIOS with incorrect brand/model information. PCB failures can also cause physical issues such as read/write head failures, and many PCB failure symptoms overlap with the symptoms of other physical hard drive issues.

Some emails from customers of WD PCB 2060-701675 failures are listed below, along with tips for replacing & repairing.

WD PCB 2060-701675 Failures:

Q: Problem changing USB 701675 to SATA

I am trying to convert WD7500KMVV USB PCB to SATA; according to the stickied post on the board the following PCB are compatible: 701675 – 701672, 701609, or 771672 I tried about 4 or 5 771672; drive DOESNT spin up, stays in BUSY (after putting USB rom). Tried 701609 but it was 192KB ROM instead of 256K so it was incompatible. I searched , for 701672 with no luck. Has anyone else had a similar problems with this PCB? …

Q: WD5000BMVV-11GNWS0 SED problem

… down his pc, in the next start, he didn’t see anything in his HDD. Drive doesn’t clicking, it is spining and look like everything is OK. PC3k can detect it and get correct ID, I try read it via USB and also with compatible sata board (original 701675 USB & 771672 Sata) but the results are the same. Can acces SA, rom, moduls and tracks also. The main problem is that the drive is a SED drive. The whole drive is encrypted via the usb controller (INIC-1607E-C11). I try decrypt it with DE …

Q: WD3200BMVV-11GNWS0 data extraction proplem

hello dears. i have HDD : Model: WDC WD3200BMVV-11GNWS0 Family ( Marn5 4K2.5 ) PCB ( 2060-701675-004 REV P1 ) Serial: WD-WXG1A80N7726 Firmware: 01.01A01 Capacity: 298.09 GB (625 142 448) every thing is ok but. i can not extract the data from it , and i have this message when i use data extractor HFS Volume Header at LBA = 625 120 090 Init virtual HFS+ partition at 625120088 HFS+ Base & BackUp Volume header is …

Q: List of compatible SATA PCB for 2,5″ USB drives

USB – SATA 701605 – 701499 701615 – 701499 701635 – 701572 701650 – 701499 701675 – 701672, 701609, or 771672 771737 – 701692 or 771692 771754 – 701692 or 771692 701754 – 771692 771761 – 771692 771801 – 771823 771814 – 771820 771859 – 771852 771949 – 771959 or 771939 771961 – 771960, 771939, or 771959 771962 – 771931 or 771959 771817 – 771820 800041 – 800022 800038 – 800025 800069 – 800066 800067 – 800065 …

Q: WDC7500KMVV-11A27S1

HELLO EVERYBODY,. ??????????????THIS DRIVE IS USB 2.0 SHASTA FAMILY.DRIVE SPINS OK BUT SHOWN IN PC SO NOT IN UDMA.I NEED ROM AND LOADER FOR THIS IF SOMEBODY HAS.TO MAKE SATA CAN ANYBODY TELL ME COMPETIBLE PCB.ITS PCB NO IS 2060-701675-001 REV P1.ONE MORE THING IT HAS SLIM CHIP U12 IN COMPARE TO REGULAR ROM.SMD TYPE. I HAVE DOWNLOAD FROM HDD GURU SUPPORT.I WRITE ROM ON DONOR PCB[ANOTHER SATA PCB .2060-771672-004-004 REV A.BUT DRIVE DOESNT SPIN.SO PLS HELP ME.

Q: Wanted: WD7500KMVV-11A27S2 OR PCB 2060-701675-001 REV P1

Hello,Has anybody have this HDD ?Western Digital WD7500KMVV-11A27S2VERY IMPORTANT:PCB label: 2061-701675-401 AB2060-701675-001 REV P1Please PM me.Thank you in advance for your help.

Q: Need PCB 2060-701675

Need PCB 2060-701675 with Processor 88i8946 this PCB has no external ROM/no U12 chipPossibly different PCB model number for SATA connection with exact same Processor.

Q: Want:WD10TMVV-11A27S2 PCB: 2060-701675-001 REVP1DCM:HHBVJBBB

Looking for the following. Can anyone help ;MODEL: WD10TMVV-11A27S2CAPACITY: 1.0TBDCM: HHBVJBBBDATE: 06 JAN 2010-12-01PCB: 2060-701675-001 REVP1

Q: Want:WD10TMVV-11A27S2 PCB: 2060-701675-001 REVP1DCM:HHBVJBBB

Want to buyMODEL: WD10TMVV-11A27S2CAPACITY: 1.0TBDCM: HHBVJBBBDATE: 06 JAN 2010-12-01PCB: 2060-701675-001 REVP1Any offers;

Q: WD Compatible drive needed

looking for a compatible drive forMODEL: WD10TMVV-11A27S2CAPACITY: 1.0TBDCM: HHBVJBBBDATE: 06 JAN 2010-12-01PCB: 2060-701675-001 REVP1Can anyone help;

Q: Wanted: WD Drive

Hi All,I’m after a drive to be used as a surrogate for the following drive:Western Digital – WD 7500KMVV – 11BG7SOR/N: 701675DATE: 25 Sep 2010DCM: HHBV2BBNDCX: DB08G9R78S/N: WX71A90D8584 Must have same Firm Ware.Must Be with-in a couple of days of manufacture date. (the same day will be better)I’m located in AustraliaThanks in advance!

Q: Wanted: WD WD10TMVV-11A27S2 or PCB 2060-701675-001 REV P1

Hi,i’m looking for a donor board or hard drive intact.It’s a Western Digital Passport SE 1TB.Anyone have any of these?Thanks!

Q: Wanted: PCB WD10TMVV – 11BG7S0

Hey guys,I need a donor – PCB WD10TMVV – 11BG7S0Drive Parameters: LBA 1953525168 1.0 TBR/N: 701675Date: 19 OCT 2010DCM: HHBV2BBnDCX: TB03G8R76Can anyone help me, please !?!?Thank you!!!!

Q: WD MY PASSPORT

I have a drive with – 2060-701675-004 (USB INTERFACE)Is it interchangeable by 2060-701672-004 (SATA INTERFACE)?

Q: Advice on swapping a PCB

is no unusual smell or unusual sounds I have also tried different PCs with various cables all without success I then bought a PCB from a PCB seller who assured me it was compatible unfortunately it did not work My original PCB number is 2061-701675-304 06P XM A526 FAXE 2 0006120 1 126 The replacement is 2061-701675-001 003PD4 XC AD13OL38 8 0001140 0141 When I attached the replacement PCB the light flashed and the drive clicked the following pattern 6 – 2 – 2 and was then repeated The

Q: 2060-701675-001 Rev P1 PCB Alternate

Hi,Which SATA PCB should be interchangeable with this one?2060-701675-001 Rev P1I have checked this one with this PCB 2060-771672-004 RevB, with this DONOR hdd doesn’t spin, seems it’s not compatible!Can you specify which one is compatible?

Q: WD Smartware USB 2 and 3 PCB`s for SALE/TRADE

Guys,i have stock of those WD Smartware PCB`s for SALE/TRADEUSB2 & USB3 – All TypesSamples here:771737771801771761771754701675and more least 70-80p from each (some are even more), wanna get rid of those and sell them or trade them with 3.5″ WD, Hitachi, Samsungif anyone is interested PMthnx

Q: WD10TMVV-11BG7S0 – NEED Donor HDD for Head Swap

Hello Guys I need this HDD for head Swap, can anyone recommend me from where i can buy donor or replacement one. I am based at London, UKWestern Digital 1TB WD10TMVV-11BG7S0, DCM EHBVJBBN, USB 2.5 Hard DriveModel: WD10TMVV-11BG7S0Date: 02 AUG 2010DCM: EHBVJBBN Product of: ThailandPCB Sticker: 2061-701675-304 06PAttachment:2013-03-27_13-23-08_691.jpg [ 1.1 MiB | Viewed 3760 times ]Attachment:2013-03-27_13-22-54_943.jpg [ 1.44 MiB | Viewed 3760 times ]Regards

Q: WD Passport 750Gb

Hello! I got a problem repairing my Western Digital 750Gb Passport Since i broke USB connector, i bought a new PCB from The PCB description is WD7500KMVV-11BG7S0 2061-701675-304 AC USB PCB Despite the PCB Part Number was slightly different from the original one (new part 2061-701675-304 AC , broken old part 2061-701676-304 03P ) the minimal requirements for PCB replace (taken from stores com/hddSupplier/Matching-Guidehtml) are satisfied

Q: Please recommend pro in US for WD My Passport (stuck heads?)

I have a WD My Passport 500GB WDBAAA5000abk-00 that does not spin up. It beeps several times and then is quiet. The drive has hardware encryption as well as password protection. Password is known. Drive was not dropped. USB is integrated in PCB. Data is pictures and videos.Drive is WD5000BMVV-11a1cs0DCM: HHCTJBBBPCB is 2060-701675-001 Rev p1Please PM with price range, terms such as evaluation fee, upfront payments, success rate etc…, and any questions.

Q: WD5000BMVV – disk not recognized by BIOS

those disks with only USB on the PCB After connecting it to the USB, the disk doesn’t make any alarming sounds – it rotates the platters, blinks the LED Unfortunately, it’s not recognized by BIOS My drive is WD5000BMVV-11GNWSO My PCB is 2061-701675-604 04P I found a donor who might send me these drive 1 WD50000BMVV-11A1CSO PCB 1 2061-701675-002 04P drive 2 WD5000BMVV-11GNWSO PCB 2 2061-701675-604 10P My question is if I have any chances to use his PCB to rescue the data from my drive

Q: 2060-701675-001 in place of a 2060-701675-004

Hello,I’ve been trying to replace a board from a WD10TMVV (USB Board). I’ve just received a 2060-701675-001 (U12 is a SOIC-8) but the original board is a 2060-701675-004 (U12 is a BGA). After U12 replacement, the motor doesn’t spin. I’ve tried also the replace the U14, but is doesn’t spin either. Are these boards compatible each other ? Is there any other component that I can replace in order to make it work ?Thanks and my best regards,Carlos

Q: sata PCB for 2060-701675

Another SATA PCB compatible to 2060-701675 apart 2060-701672?thx

Q: Need WD 11A27S0 – EHBVJBBB 24 OCT 2009

were blocked on platters (ambulance sound), I freed them but now I head a scratching noise and an other stange noise when platters stop turning (it seems that the axe or motor is little broken) Here is my disk’s specs WD10TMVV – 11A27S0 R/N 701675 Date 24 Oct 2009 DCM EHBVJBBB S/N WXE0C7982850 I’ve found a similar disk with DCM EHBVJHBB ( link ), do you think that it will be good for heads swapping ? Also, for platters swapping or (motor + heads) will be this one suitable ? I may

Q: SATA Connection Ground Points for USB 701675

Ace Labs seem to have left off the highlights for the ground points to convert the 701675 USB board to a SATA board. Can someone advise me of the correct points (fzabkar ? ?)

Replacement WD PCB 2060-701675:

To repair a failure board, the simple way is swapping the failure board with a replacement board. Donor boards on HardDriveParts.com are listed below:

Contact US

If you have any questions, please feel free to contact us: sales@harddriveparts.com

Comments are closed.