WD PCB 2060-771640 Failure

WD PCB 2060-771640 Failure

PCB failures (Such as WD PCB 2060-771640-*** (2061-771640-***)) affect thousands of hard drives every year and often result in permanent data loss. A hard drive may suddenly fail to power on, and a computer may not detect that it is plugged in. Some failed hard drives will also show up in computer BIOS with incorrect brand/model information. PCB failures can also cause physical issues such as read/write head failures, and many PCB failure symptoms overlap with the symptoms of other physical hard drive issues.

Some emails from customers of WD PCB 2060-771640 failures are listed below, along with tips for replacing & repairing.

WD PCB 2060-771640 Failures:

Q: WD5000AAKX-22ERMA0

Hello, I have WD5000AAKX-22ERMA0 patient HDD with PCB damaged(Smooth IC Burned)PCB No 2060-771640-003 REV A. i removed U12 and read with EPROM reader.. I have donor PCB with Same no but HDD is WD5000AAKX-60U6AA0.. If i am trying to write rom in this PCB giving me size error.. As donor size 256 and patient is 512.. If i directly replace(physically) donor’s U12 with Patient’s U12 will it work? Thanks in advance

Q: Table for all WD Marvell PCB’s

701640 Tahoe Dragfly1 Dragfly2 Dragfly3 – 771640 Dragfly2 Dragfly1 Tahoe LT – 701590 Midori Atlantis Gekko Kermit Pincilte – 771698 Sadle G6 – 701537 Pinnacle Kermit STG Twin lakes – 701444 Sequoia Tornado Tornado 2D Tornado …

Q: Need a WD5000AAKS-00WWPA0

Hello all. Need WD5000AAKS-00WWPA027 July 2010. DCM DARNHTJMHNDCX 2W08W54P8PCB sticker 2061-771640-503 AAand WD7500AACS-00D6B031 Aug 2008DCM HARNHT2CABPCB 2061-701537-R00 ADTyAlex.

Q: WD5000AADS-00S9B0 PCB burned, need replacement & soldering

A customer’s Western Digital drive isn’t spinning or being detected by BIOS Model WD5000AADS-00S9B0 {1 platter, yay!} Date 06 AUG 2010 DCM HBRCNT2AGB DCX 5007S9495 Made In Thailand PCB Marking 2060-771640-003 REV P1 PCB Sticker 2061-771640-N03 02P Customer’s house had a power surge, and his power supply and motherboard blew On the hard drive PCB, the Smooth L7251 31 is clearly fried, and a few other parts are possibly discolored In the process of frying, this

Q: WD1002FAEX not booting or spinning; fried PCB, or worse?

(or not!) would be much appreciated Below I’ve attached various pictures that should be helpful, showing both sides of the PCB and all the information on the HDD itself For the purposes of showing up in the search, the PCB number is 2060-771640-003 REV P1, firmware appears to be 00Z3A0, and the DCM is HARNHTJABB Please let me know if you need any other info In any event, I think I’ve been taught not to procrastinate on backups anymore

Q: Need PCB WD1002FAEX

PCB – 2061-771640-H03Date: 08 Sept 2010DCM: HANNHTJAABDrive just up and stopped working. No sounds, anything. Absolutely no power gets to drive, thinking its gotta be the PCB. Nothing on it looks bad, scorched or broken but just one day – nothing.

Q: Searching PCB for WD1002FAEX (2060-771640-003 REV P1)

HelloIm looking for a PCB for my WD1002FAEX 2060-771640-003 REV P1I have looked on this forum before posting and i got enough information now, that i must swap my U12 chip from my old PCB to the new PCB. But now im searching for the pcb !Thanks

Q: NEED PCB for WD10EARS-00Y5B1 ref PCB 2061-771640-B03 AB

pb with HDD WD10EARS-00Y5B1 64 MB cache. I need PCB ref 2061-771640-B03 AB 64 thanks a lot ludop2

Q: WD5000AADS-00S9B0 Donor HELP!!!!!!!!

I have WD5000AADS-00S9B0 and it’s PCB has been burned due to power surge, how can i match the donor HDD for my WD( in case replace the PCB only and also in case of replace the Head or platters only )My Model : WD5000AADS-00S9B0My DCM : DCM: HBNNHT2AHNMY PCB STICKER : 2061-771640-Q03 01P XC BP02 3Z85 K 0001130 1131MY PCB : 2060-771640-003 REV P1So how can i match the donor HDD that can work for PCB or HEAD & Platters swap?

Q: Looking for PCB (WD1002FAEX-00Z3A0)

I’m looking for 2 PCB:Model: WD1002FAEX-00Z3A0DCM: HBRNNTJABBPCB STICKER: 2061-771640-H03 ABD1PCB: 2060-771640-003 REV P1Thanks.

Q: Looking for WD Royl PCB: 2060-771640-002 Rev P2

Please email me: brianAT300dollardatarecoveryDOTcom.Attachment:photo 1.JPG [ 482.92 KiB | Viewed 2001 times ]Attachment:photo 2.JPG [ 553.92 KiB | Viewed 2001 times ]

Q: 192KB to 256KB ROM Conversion

I have a case WD5000AAKS (NO SPIN), With donor PCB (Rev A) Spins But with PATIENT ROM doesn’t SPIN, assuming ROM Corruption Now after taking back ROM to donor and patient, drive doesn’t spin with any PCB, ordered more 2 PCBS, 771640 (Rev P1), now no spin with any one of them it in STATUS its “PCB” instead of Ready/error/busy PATIENT PCB 771640 REV P1 1st DONOR PCB 771640 REV P1 (but it’s not working anymore) 2nd & 3rd PCB 771640 REV A (STATUS is “PCB”)

Q: Searching for WD1002FAEX PCB

Specifications:Mdl. : WD1002FAEX-00Z3A0DCM : HBRNNTJCBBPCB-Sticker: 2061-771640-H03 ABD1PCB: 2060-771640-003 REV P1Thx in advance…………

Q: WD10EARS Data recovery after PCB swap

Do you guys know what might be the problem? below is some specs and data but if something is missing please let me know MODEL WD10EARS-22Y5B1 SN WCAV5M411787 DCM EARNHT2MAB DATE 23 DEC 2010 PRODUCT OF THAILAND Board number on label 2061-771640-B03 AC Board number on PCB 2060-771640-003 REV A Controller Chip 88i9045-TFJ2 Smooth Chip L7251 31 thanks alot, Mark

Q: For Sale WD Caviar Blue WD5000AAKS-PCB 2060-771640-003 REV

Helloi have For Sale WD Caviar Blue WD5000AAKS- Platine / PCB 2060-771640-003 REV AThe Pcb Working 100% without any ProblemIf you have any Qautions pls send me mailNur2day hotmail.com

Q: WD5000AAKS-00TMA0 firmware- 2061-701477-800 AB

that was clicking also (didn’t know that at the time though) tested the new, no good Swapped boards, no good Don’t see anything that stands out as burned on either board So I searched our piles of scrap and found a WD10EVDS-63U8B1 with 2061-771640-M03 AE firmware that spins up They look relatively the same and the placement of connectors, chips, screw holes, etc are exactly the same Is it possible to swap these just to get the data off, or is the firmware difference to much? Am I going

Q: WD5000AAKS-60Z1A0 PCB Swap

Hi guys,I have following WD hard drive:WD5000AAKS-60Z1A0Date: 19 Apr 2010DCM: HANNNTJCANDCX: 4004Z4211PCB:2060-771640-002REV P22061-771640-L02 01P XC BL01 0ADD L 0007410 0417which is dead. I read a lot about this and other web sites suggest getting a donor PCB with same number: 2060-771640-002 REV P2 as it should be compatible.Just to confirm with you, if I get one, is it possible just to swap PCBs for my hard drive to work again? If not, why?Thank you in advance for your help!

Q: WD PCB number match

Hello,for matching donors PCB, which numbers are importantWD5000AAKS-00C8A0 PCB 2060-701477-002 Rev AWD5000AAKS-00YGA0 PCB 2060-701477-002 Rev AWD5000AACS-00ZUB0 PCB 2061-701477-002 Rev AWD5000AADS-00S9B0 PCB 2060-771640-003 Rev P1

Q: WD5000AKS won’t spin up

I took the board off, inspected it thoroughly No sign of damage, over heating, etc Found four diodes, D1-D3 and one unmarked diode All tested good Can I just get another board off of the same model drive? Does it have to be the same number (771640-202), or is this not a feasible option? If I were to get another drive of the same model, is transferring the platters from the non-spinning drive to the one that spins an option? Or does that require a clean room and special tools? I’d really

Q: WD10EADX with 2060-771640-003 REV A PCB recovery questions

Hello I want to recover this disk (WD10EADX with 2060-771640-003 REV A PCB) I found some spots on PCB, maybe it’s corrosion Photos for more info This disk was used in external box and exactly same spots are on USB bus in external box My plan is to buy another 2060-771640-003 REV A PCB and try to replace original PCB I found 1050 number on IC, so that’s probably PCB’s date of manufacture I’m

Q: WD WD10EADS-00M2B0 PCB: 2060-771640-001 REV A

Dear all,I have the problem, that this hard disc gives a clicking sound.You could hear it in the mp3.On this PCB there is no BIOS chip.Could anybody please help and say exactly, what is going on with this disc.Is this a head crash?Thanks for help.Nuker5

Q: PCB compatibility – WD WD5000AAKX :

Hi there I have this drive WD5000AAKX – 16MB Cache With native PCB 2060-771640-003 REV A The PCB have broken SATA connector, or better yet, MUTILATED SATA connector, with broken plastic and 3 contacts broken on the place you are supposed to plug the SATA cable No matter how much i look at it i don’t think i can fix it Don’t know how the “client” did manage to do that to the drive, but the drive

Replacement WD PCB 2060-771640:

To repair a failure board, the simple way is swapping the failure board with a replacement board. Donor boards on HardDriveParts.com are listed below:

Contact US

If you have any questions, please feel free to contact us: sales@harddriveparts.com

Comments are closed.