Samsung PCB BF41-00314A Failure

Samsung PCB BF41-00314A Failure

PCB failures (Such as Samsung PCB BF41-00314A) affect thousands of hard drives every year and often result in permanent data loss. A hard drive may suddenly fail to power on, and a computer may not detect that it is plugged in. Some failed hard drives will also show up in computer BIOS with incorrect brand/model information. PCB failures can also cause physical issues such as read/write head failures, and many PCB failure symptoms overlap with the symptoms of other physical hard drive issues.

Some emails from customers of Samsung PCB BF41-00314A failures are listed below, along with tips for replacing & repairing.

Samsung PCB BF41-00314A Failures:

Q: Samsung HD103sj not spinning or making any noise.

removed the TVS on the PCB and jumped the fuse Still no results Right now I’m looking to get a new PCB for this drive I plan on performing the chip swap as well, my only concern is PCB compatiblity I see model numbers for PCB’s such as BF41-00314A 00 S3M Rev 03 R00 and BF41-00303A 00 I’m just not sure which ones should be compatible I’ll post some pictures of my hard drive for reference iimgurcom/eE289jpg iimgurcom/ttyAAjpg iimgurcom/jFV5vjpg Thanks

Q: Samsung HD204UI PCB BF41-00314A 00

Hi everyone, thanks and sorry for my bad english in advance Due to an error i applied 12v instead 5v and 5v instead 12v to the power contact of my HDD I tried the damaged HDD with other PCB from the same model as mine, result the hard disk spins, but it’s not detected by BIOS or SO, i don’t know if this is due because of a distinct firmware (one PCB is from 2011/09 and the other from 2010/10) Anyway i bought other PCB in a website (i don’t know the date of fabrication) of the same model but

Q: Swapping PCB on Samsung HD204UI?

with a working one), it is exactly the same damage as shown at forumhddgurucom/viewtopicphp?t=24676 , where it was identified as being an STJ009 MOSFET Now I happen to have an identical drive with the same PCB (the codes match BF41-00314A 00), so I’m thinking I should be able to perform a PCB swap However, I read from www com/hard-drive-pcb-donor-match , specifically for Samsung drives, that “Chip transfer / swap or similar services could be required

Q: Samsung HD204UI (BF41-00314A PCB) problems

didn’t spin up, not detected in the BIOS After a lot of poking about with a multimeter I concluded that the PCB was dead, and that there was a reasonable chance that a replacement PCB swap would get the drive going again (PCB serial No is BF41-00314A) After furnishing my colleague with my findings and the number of the PCB, he decided it was worthwhile and procured a second hand one from Hong Kong (his decision, not mine) The board arrived today, nothing outwardly wrong with it, more

Replacement Samsung PCB BF41-00314A:

To repair a failure board, the simple way is swapping the failure board with a replacement board. Donor boards on HardDriveParts.com are listed below:

Contact US

If you have any questions, please feel free to contact us: sales@harddriveparts.com

Comments are closed.