Seagate PCB 100535704 Failure

Seagate PCB 100535704 Failure

PCB failures (Such as Seagate PCB 100535704) affect thousands of hard drives every year and often result in permanent data loss. A hard drive may suddenly fail to power on, and a computer may not detect that it is plugged in. Some failed hard drives will also show up in computer BIOS with incorrect brand/model information. PCB failures can also cause physical issues such as read/write head failures, and many PCB failure symptoms overlap with the symptoms of other physical hard drive issues.

Some emails from customers of Seagate PCB 100535704 failures are listed below, along with tips for replacing & repairing.

Seagate PCB 100535704 Failures:

Q: Seagate F3, ST500DM002 PCB:100535704 REV D

Hello . the HDD Still busy and i see this in Terminal Boot 0x10M. Spin Up. RECOV Servo Op=0100 Resp=0005[0x00000000][0x0000B67C][0x0000BA10]. Trans. Rst 0x10M. MC Internal LPC Process. Spin Up. (P) SATA Reset . what i do please ??

Q: Seagate F3, ST500DM002 , Barracuda 7200.12 (3F PHARAOH) busy

Hello dears.. please help me to know where the short-circuit connection points in the PCB . 100535704 REV C or REV D of the HDD. Seagate F3, ST500DM002 , Barracuda 7200.12 ( 3F PHARAOH ). because the terminal no response ,and still busy.. thank you.. MOHAMED MUSA .

Q: Shorting Points for 100535704 Rev. C

Hello,. I have a Seagate ST3500413AS 7200-12, which sounds like it comes ready perfectly, but I cannot read a drive ID or capacity with the PC3K and I have no idea what the shorting points are on this PCB, it is not in the manual. Can anybody help me out with this?. Thank you for anything anybody has on this issue and drive!

Q: Baracuda 7200.12 (ST3500413AS)

Hi,i am having seagate Baracuda 7200.12 HDDST3500413AS FW JC45PCB 100535704 REV Bthis hdd is not getting detected in bios.i tried to clean contacts but no use.nothing found any burn on PCB.while power on PC no any think happenes like vibrations of motor(motor not starting)what might be problem.seems PCB problem.How to dignose?Please guide.

Q: PCB ST3500412AS FW CC32 100535704 REV B PCB

PCB ST3500412AS FW CC32 100535704 REV B PCBneed this urgent. Data required from the hard rive very important wedding photos !!

Q: PCB ST3500412AS FW CC32 100535704 REV B PCB WANTED

PCB ST3500412AS FW CC32 100535704 REV B PCBneed this urgent. Data required from the hard rive very important wedding photos !!

Q: Seagate Barracuda LP 500GB ST3500412AS FM CC32 PCB Problem

Hellow every one My Seagate Barracuda LP 500GB ST3500412AS FM CC32 has stoped working , i found out it was pcb problem the PCB code is 100535704 REV A I somehow managed to obtain a pcb with same model (ST3500412AS FM CC32) the only difference is its REV B i connected the usb adaptor the green flash is turned on but the hdd does not spin the computer recognies the device but the hdd not appear in the computer so what could be the problem

Q: Require Seagate Barracuda 7200.12

Mornin’ all, I’m after the following drive for platter extraction:Seagate Barracuda 7200.12 Model: ST3500418ASFW: CC35Site: SUPCB: 100535704 REV APlease PM if available, RegardsChris

Q: Small Lot of Seagate 500GB Donor Drive

Seagate 720012 500GB ST3500418AS 6VMVNM5C HP40 SU 100535704 Rev C Seagate 720012 500GB ST3500418AS 5VMFP5B0 HP35 SU 100535704 REV B Seagate 720012 500GB ST3500418AS 6VMGS6RQ HP35 SU 100535704 REV B Seagate 720012 500GB ST3500418AS 9VMMSTC4 HP35 TK 100535704 REV B Seagate 720012 500GB ST3500418AS 9VM71SYT HP34 TK 100535704 REV B Seagate 720012 500GB ST3500418AS 9VM7C2E5 CC46 TK 100532367 REV

Q: Need PCB & ROM swap (Seagate ST500DM002 100535704 REV C)

?PCB, hoping that’s all that got hit Would be also interested in your pricing for moving the ROM, if I send it to you Seagate Barracuda 500GB SATA Model ST500DM002 S/N S2A6M2A4 P/N 1BD142-302 Firmware KC45 Date Code 12484 Site Code SU PCB P/N 100535704 REV C

Q: Why seagate Baracuda 7200.12 250GB hdd pcb failing so much

Of late, we have observed that Seagate Baracuda 7200.12 250GB hdd pcb bearing no 100535704 rev b is failing very much, while that of media is ok.Masters, can you describe the main reasons behind the troublesome PCB, whether some capacitance is falling or any other spare.Would like to have the diagram describing checking of the PCB.Hope the PCB master Sir “FZABKAR” is listening.Others are most welcome to provide link or comments on spare of the troublesome PCB.

Q: ST3750330NS, ST500DM002 for sale

Selling these recertified by Seagate HDD-s, PM, if interested.ST3750330NS Barracuda ES.2FW: SN16Date Code: 08332Site Code: WUXISGPCB 100466824 Rev B-ST500DM002 BarracudaFW: KC48Date Code: 11213Site Code: SUPCB 100535704 Rev B-ST500DM002 BarracudaFW: KC48Date Code: 11213Site Code: SUPCB 100535704 Rev C

Q: repair seagate st500dm002

Hi to all guys. Yesterday my hd burnt! After removing it I noted that the board was fired and as you can see some smd components are out. Can someone tell me what type of components are? I would go to a electronic repair office to control the board, but I think I need a scheme. The board is 100535704 REV C ?Thank you

Q: How to repair Seagate Barracuda 7200.12 100535704 C

hoping that’s all that got hit Would be also interested in your pricing for moving the ROM, if I send it to you Seagate Barracuda 720012 500GB Model ST3500413AS S/N S2ABW508 P/N 9YP142-304 Firmware JC48 Date Code 13247 Site Code SU PCB P/N 100535704 REV C How to repair Seagate Barracuda 720012 100535704 C s26postimgorg/8i28myqyt/1000535704_C_Backjpg

Q: Seagate 500 gb Harddisk – pcb board 100535704 REV C burned

Hi,My Harddisk, 500 gb seagate with pcb board 100535704 REV C got burned at a diode near power adapter. Its not detecting at all and not running also.. i couldn’t get a replace board FOXCONN PCB 100535704 REV C at my place.. can i use some other compatible board.. i tried changing to FOXCONN 100535704 REV D PCB board..at that time the hard disk runs..but not detecting in both bios or disk management. is there any way that i can retrieve the data from…i need it very badly…

Q: Seagate F3 [ Is Serial Number In ROM ? ]

Hello , I have 4 Units of Seagate 7200.12 Series F3 With Me .The Following Are The Model Numbers ST3500418AS X 2,ST3500413AS X 1 And ST3160316AS .Do they have thier serial number in ROM .If yes whats the location .The ST3500418AS X 2 + ST3160316AS Have PCB Number 100535704 Rev C .

Q: Has anyone figured out the JTAG pins on a Seagate LSI chip ?

I am trying to figure out the JTAG pins on an LSI Seagate processor The board I am working on is a 100535704 Rev C from a 720012 drive I chose this board because it has 2 sets of header pads on the pcb – 1 is 20 pads and the other is 38 pads (also has 18 pads for the MHA) Nothing seems to make sense on these pads Only 3 of the pads have anything that could be a clock, but they are pulses, not a square wave, either 30

Q: Data recovery help!

It sounds like it’s spinnig normally but not detecting in both bios or disk management Its PCB also looks like normal in both sides (no physical damage) I’ve tried to change its PCB with same drive but no success The donor drive’s PCB is “100535704 Rev C” but mine is “100535704 Rev D” I wonder that what is my chance if I found the identical PCB with same Rev? or is there any other way that I can try? Thank you in advance IMG_0756JPG IMG_0758JPG

Q: Seagate ST3500418AS PCB failure

SOP8 schottky + mosfet was short too, and I think that there’s another shorted component Looks like a surge or killer power supply This pushes me to replace PCB and I’m considering one from a good ST500DM002 I have at hand ST500DM002 has a PCB 100535704 rev C, chipset LSI B5502D0 and driver ST “SMOOTH” UM04 Both boards have identical shape and layout, but have different brand IC’s (possibly compatibles or doing the same) Can I use 100535704 PCB in place of 100532367 if I just

Q: PCB seagate 100535704 REV D

hello. do you have information about this pCB: 100535704 REV D?-electronic componentseverythingthanks for reading

Q: PCB seagate 100535704 REV D

Do you have information about components on this PCB?

Q: Sanity check/questions step 6: 7200.12 recovery newbie

so I won’t mention it) They were able to provide one with same firmware and I later found the controller PC boards match both p/n and Rev Slight variations in semiconductor markings Inoperative drive is Barracuda ST3320418AS, 720012, board is 100535704 Rev B Before delivery, seller advised I change the serial memory chip if there was one, or send back for free assessment & possible $60 repair Told me several 25xxxxxx type p/n’s to look for on IC and to look for burn marks Step 2

Q: Seagate Pipeline HD .2

Hi, My client has a Seagate Pipeline HD 2 320GB desktop hard drive with PCB number 100535704 REV C Problem It is detected by the motherboard bios, shows windows logo and pc restarts After that hdd is not detected anymore No click sounds But after it restarts, pc screen shows “There seems to be a problem with the hard drive” Is this problem with PCB? I see no visible damage marks on any components

Replacement Seagate PCB 100535704:

To repair a failure board, the simple way is swapping the failure board with a replacement board. Donor boards on HardDriveParts.com are listed below:

Contact US

If you have any questions, please feel free to contact us: sales@harddriveparts.com

Comments are closed.