WD PCB 2060-771945 Failure

WD PCB 2060-771945 Failure

PCB failures (Such as WD PCB 2060-771945-*** (2061-771945-***)) affect thousands of hard drives every year and often result in permanent data loss. A hard drive may suddenly fail to power on, and a computer may not detect that it is plugged in. Some failed hard drives will also show up in computer BIOS with incorrect brand/model information. PCB failures can also cause physical issues such as read/write head failures, and many PCB failure symptoms overlap with the symptoms of other physical hard drive issues.

Some emails from customers of WD PCB 2060-771945 failures are listed below, along with tips for replacing & repairing.

WD PCB 2060-771945 Failures:

Q: Compatible SATA PCB with 2060-771945 : TRAILXLS Family

Hi, I hope someone can point a compatible SATA pcb for: WD10EZRX-00L4HB0. PCB: 2060-771945. TRAILXLS Family The problem is native pcb is missing and i could’t find said PCB or drive.. Is there another PCB which is compatible with this one ?? thanks in advance.

Q: Loader for WD20EZRX-00D8PB0 FW 0001006A

Hello I’m looking for a Loader of the following WD 2TB HDD with inaccessible SA: Vendor: Western Digital Model: WDC WD20EZRX-00D8PB0 PCB: 2060-771945-001 REV P1 PCB-Barcode: XCFA136N55600041805 ROM information: View ROM information ROM Data size……………………… : 512 Kb Firmware version…………………… : 0001006A Heads configuration………………… : by map Heads number………………………. : 6 Heads number in …

Q: HDD WD20EFRX damaged 5V TVS diode removed HDD still dead

my harddrives The first one has TVS diode burned, no other protection, means 5V on this HDD was shorted to GND The second one, the important one is WD 2TB RED The 5V TVS(D3) shorted, the 0ohm(R67) measured open HDD WD20EFRX-68EUZNO PCB 2060-771945-001 REV A DCM HGRNHTJCG Removed 5V TVS(D3), replaced 0ohm(R67) HDD is spinning, clicking, recognized in BIOS as PATA PS WDC WD20EFRX-68EUZNO But not running in Windows Used SATA data and power cable that I use for other working drive so

Q: WD20EZRX PCB DAMAGED

Can I use Donor 2060-771945-002 REV A for the burned pcb patient 2060-771945-001 REV P1By Transferring ROM Chip? both pcbs are from WD20EZRX HDD

Q: WD10EZRX 1 TB DRIVE , NO SPIN

Hello, WD10EZRX 1 TB DRIVE , NO SPIN , PCB Burned .pcb no – 2602-771945-001 .I will swap ROM but do your know any compatible PCB with 771945 .I dont have Donar PCB but I have 2602-701640 & other WD 1TB drives with different PCB no.Regards,Alex

Q: WD20PURX using compatibile PCB to 2060 771945-002 rev A

HelloI have disk WD20PURX with damaged PCB. So PCB was cut with something sharp and many tracks are damaged. Number PCB is 2060 771945-002 rev A.Because at the moment I don’t have the same PCB is it possible using another PCB? Could help me what PCB I can use? I attached some photos disk and PCB.thanks

Q: Need Troubleshoot Help WD30EFRX HDD (TVS Diodes, 0Ω R, etc)

Hello fellow data geeks, I’m new here and would like some insights on my WD30EFRX 3 TB Red HDD that got internally shorted by a faulty PSU/MB My board is the 2060-771945-002 REV A (Reference picture, not mine) i68tinypiccom/k9jnfqjpg Here’s my actual SATA power section that I tried to test out the TVS diodes on as well as some resistors i66tinypiccom/5p4pddpng So I’ve run continuity test on the following components with an analog

Q: WD30EFRX ROM needed

Hello,I have a WD30EZRX-00SPEB0 with the ROM damaged.Unfortunatly I do not have any compatible ROM.Does someone have a compatible disk that can send me the ROM to try if it is compatible.WD30EXRX-00SPEB027 MAY 2015HANNHTJCABS/N WCC4…PCB: 771945-002 Rev.AThanks.

Q: WD20EZRX-00D8PB0 Burnt PCB Swap

and I have a drive that was on fire, and from the looks of it for a couple of seconds atleast the issue i am having with it is i am unable to get a rev number, as the board has been chunked out where it would normally be the board is a 2060-771945-001 so the main question is what boards are compatible? if someone has a chart they could point me at that is great, as i dont want to take stabs in the dark also i do not have a pc3000, only deepspar here is link to pictures

Q: WD MyBook 4 TB WD40EZRX 00SPEB0 Encrypted +Pasword %100

A hard case solved %100 HDD My Book Case SerialWCC4E3XNK648 ModelWDBFJK0040HBK My Book 4TB 3,5″ Inside 4 TB WD40EZRX 00SPEB0 Hdd with USB Bridge traingle PCB UCB Bridge PCB No 4060 705149 000 REV A Chip Asmedia ASM1051W HDD PCB No2060 771945 002 REV A FW 8000A80 ROM Firmware version 00010083 Customer set password , also Self Encrypted with SA and PCB ( I am not sure only USB Bridge card or both card encription) Problem USB Bridge PCB had electical problem So drive not spinned

Q: Need Firmware for WD30EZRX-22D8PB0 PCB 2060-771945-001

Hello, I own a hard drive from the manufacturer Western Digital Model WD30EZRX-22D8PB0 PCB 2060-771945-001, which I can not access anymore If the hard disk is connected, the Bios Post takes 1-2 minutes and it will not be recognized on Windows or if it is detected then it will not be able to access it It is not possible to access the properties via the Device Manager and Disk Management can no longer be called A donor

Replacement WD PCB 2060-771945:

To repair a failure board, the simple way is swapping the failure board with a replacement board. Donor boards on HardDriveParts.com are listed below:

Contact US

If you have any questions, please feel free to contact us: sales@harddriveparts.com

Comments are closed.