I have a 2060-771640-003 REV A board on a 500 gig WD drive. it shows up in disk management but says no data. I don’t hear the drive spin up at all or make any noise. would this be a pcb issue? or is there something with the motor?? please help me

If your HDD can’t spin, you can swap PCB to try.

When you get this PCB, you need to move your original PCB’s BIOS to the replacement PCB. The 8pins (4 pins on each sides) with 25P05VP、25P10VP、25F512、25F1024、25F1024AN、SST25VF512、SST25VF010, etc. are the BIOS.