PCB failures (Such as WD PCB 2060-800022-*** (2061-800022-***)) affect thousands of hard drives every year and often result in permanent data loss. A hard drive may suddenly fail to power on, and a computer may not detect that it is plugged in. Some failed hard drives will also show up in computer BIOS with incorrect brand/model information. PCB failures can also cause physical issues such as read/write head failures, and many PCB failure symptoms overlap with the symptoms of other physical hard drive issues.

Some emails from customers of WD PCB 2060-800022 failures are listed below, along with tips for replacing & repairing.

WD PCB 2060-800022 Failures:

Q: Looking for compatible SATA PCB for WD40NMZW…

This is one of the new smaller USB PCBs. The PCB number is 2060-800041-003 REV P1. Unfortunately, this doesn’t work with 2060-800022-000 REV P2 (the only SATA version of this PCB that I know of). It just stays busy without spinning. I also tried manually saving ROM from USB PCB and writing into SATA (this bricked the ROM). Does anyone know of a “small” PCB that is different than 2060-800022-000 REV P2? It’s possible I just …

Q: READ Channel 0n 2060-800022 PCB

Hello, I had WD20NMVW-11C3NS2 with USB Interface PCB 2060-800041. Changed to compatible 2060-800022. After connecting It comes to Ready State but gets to BSY on HDD ID. I Have tried Isolating head contacts from PCB but it remains BSY only. Please provide Read Channel points which to short to get to SA access. thank you all

Q: Is the WD30NMVW-11C3NS2 supported?

Hi . I have WD30NMVW-11C3NS2 drive that does not have any com-port connection. Is this drive supported for reading firmware? . Is there a way of connecting the PCB to a com-port?. Is there a SATA donor drive that could be used? I have looked at the WD30NPVX-00N2PT0 with a PCB 2060-800022-300 03P. And has the data encryption key been found?. Is there a way of soldering a SATA connector to this PCB? . PCB number: 2060-800041-000R

Q: List of compatible SATA PCB for 2,5″ USB drives

… 771737 – 701692 or 771692 771754 – 701692 or 771692 701754 – 771692 771761 – 771692 771801 – 771823 771814 – 771820 771859 – 771852 771949 – 771959 or 771939 771961 – 771960, 771939, or 771959 771962 – 771931 or 771959 771817 – 771820 800041 – 800022 800038 – 800025 800069 – 800066 800067 – 800065 810012 – 800022 If somebody knows another compatible boards, please write it here in this topic.

Q: WD Passport USB transfer to compatible SATA Circuit PCB

– 701672, 701609, or 771672 771737 – 701692 or 771692 771754 – 701692 771761 – 771692 771801 – 771823 771814 – 771820 771859 – 771852 771949 – 771959 or 771939 771961 – 771960, 771939, or 771959 771962 – 771931 or 771959 771817 – 771820 800041 – 800022 701675-001 – 701672-001 External ROM 88I9045-TJF2 701675-001 – 701609-004 No External ROM 88i8946-TJF2 701609-000 – 701675-001 Good luck

Q: READ Channel 0n 2060-800022 PCB

Hello,I had WD20NMVW-11C3NS2 with USB Interface PCB 2060-800041. Changed to compatible 2060-800022. After connecting It comes to Ready State but gets to BSY on HDD ID. I Have tried Isolating head contacts from PCB but it remains BSY only.Please provide Read Channel points which to short to get to SA access.thank you all

Q: Is there a compatible SATA PCB for 2060-800041-003? WD40NMZW

Looking for SATA compatible PCB for 4TB 2.5″ WD USB drives. Does anyone know if there is a compatible SATA PCB available yet?Note: when writing a “4TB ROM” to a SATA PCB from a 3TB drive, I just get BSY light (no spin). It seems the 3TB SATA PCBs (i.e. 2060-800022-000 REV P2) are not compatible with 4TB USB PCBs (i.e. 2060-800041-003 REV P1).Any insight appreciated. Thanks,Brian

Q: WD40NMZW-11GX6S1 USB-800041-003 SATA PCB?

WD40NMZW-11GX6S1 USB-800041-003 WHICH SATA PCB WILL SUPPORTI tried 800022-000 didn’t work. no spin only bsy?

Q: WD40NMZW-11GX6S1 USB-800041-003 SATA PCB?

WD40NMZW-11GX6S1 USB-800041-003 WHICH SATA PCB WILL SUPPORTI tried 800022-000 didn’t work. no spin only bsy?

Q: wd40nmzw spin and immediatly stop

I think Rom is corrupt, partly because I see strange characters edit within winhex What do you advise me to do?In attachment the original rom thanks to all the original pcb is 2060-800041-003 rev p1 I have change with sata pcb number 2060-800022-000 rev p2

Q: Introduction of MRT New Software Version 2130

more details please refer to corresponding tutorial In Western Digital utility, a new family Apollo has been added, 1961 (WD10JMVW) has been added into support list of USB decryption The speed of Boot Rom mode has been increased with board ver800022 is added into support list of Boot Rom Re-program the RAM Headmap Editing function, in which the HDD with board ver800022 has been added, which meanwhile enhances its compatibility with some drives previously not well supported Most frequently

Q: Looking for WD PCB 800022-002

Hello, I am trying to find this PCB which is compatible with WD40NMZW-11GX6S1 PCB. Didn’t have any luck at .

Q: WD40NMZW-11GX6S1 PCB to SATA

could help of how to connect pins could someone help me with this USB PCB where to solder each pin? eg Pin 2 with E71, Pin 3 with E72 Thank you in advance PS When will WD40NPZZ-00PDPT0 with compatible Sata pcb 2060-800022-002 will be available in Europe in a fair price? ? ? ?

Q: 2060-800041-003 REV P1 SATA compatibility

Hi,Does anyone check if the SATA 2060-800022-002 REV P1 is compatible with USB 2060-800041-003 REV P1?SATA 2060-800022-002 REV P1 from a WD40NPZZ-00PDPT0USB 2060-800041-003 REV P1 from a WD40NMZW-11GX6S1Thanks,

Q: Bios chiptransfer without soldering

Bios chiptransfer without soldering 800022 800065 80077 800011 80066[img][Attachment:11.jpg [ 156.39 KiB | Viewed 1946 times ]/img][img]Attachment:22.jpg[/img][img]Attachment:33.jpg[/img]You can contact me if you need Skype: sosit msn.cnProgrammer + 5 adapters + host = 350 USD

Q: WD40NMZW-11GX6S1 failed to ID

Hi need some help here.I have this patient drive WD40NMZW-11GX6S1 which I swaped the USB PCB to SATA. After that I tried to load them into MRT utility by shortening TV9 and TV10. I couldn’t manage to ID it. It failed and stuck in busy mode. Did I missed anything or is there another way to get this drive to ID in MRT?Patient USB PCB: 2060-800041-003- Rev P1SATA PCB: 2060-800022-002 Rev P1

Replacement WD PCB 2060-800022:

To repair a failure board, the simple way is swapping the failure board with a replacement board. Donor boards on HardDriveParts.com are listed below:

• WD WD30NPRZ PCB Board 2060-800022-000
• WD WD40NPZZ PCB Board 2060-800022-000
• Western Digital HDD PCB 2060-800022-000
• Western Digital PCB Board 2060-800022-002