Seagate PCB 100466725 Failure

Seagate PCB 100466725 Failure

PCB failures (Such as Seagate PCB 100466725) affect thousands of hard drives every year and often result in permanent data loss. A hard drive may suddenly fail to power on, and a computer may not detect that it is plugged in. Some failed hard drives will also show up in computer BIOS with incorrect brand/model information. PCB failures can also cause physical issues such as read/write head failures, and many PCB failure symptoms overlap with the symptoms of other physical hard drive issues.

Some emails from customers of Seagate PCB 100466725 failures are listed below, along with tips for replacing & repairing.

Seagate PCB 100466725 Failures:

Q: DiamondMax 22 Rst 0x20M Error

Hi F3 Arch hdd model: STM3500320AS fw: MX1A p/n: 9GT154-326 pcb: 100466725 REV A DLAJ-4 smooth: 100501286 In terminal, drive spin, stays BSY, terminal shows only: Rst 0x20M Then after 15 sec it stop spindle. Pcb gets really hot over smooth chip I think it might be pcb related, but I am not sure because I don’t have a identical match All the ones I have use 100369972 smooth controller, while this one uses …

Q: PCB Seagate ST3500320AS

Hi,I am looking for a replacement PCB for Seagate Barracuda 7200.11 500GB ST3500320AS Firmware: SD15. PCB board details are: PCB 100466725; Rev A DLAJ-4.I tried looking around Google and some PCB companies. I am awaiting for their replies. As I do need it urgently, I am trying my luck here as well.Thank you.

Q: Seagate ST3500320AS -Spins OK, No Clicking, Not detected

Hi, I’ve a Seagate ST3500320AS Barracuda 720011 Model ST3500320AS FW SD15 PN 9BX154-303 PCB 100466725 Rev A DLAJ-4 Disk spins absolutely fine, no clicking sound, disk vibration also ok, but not detected in BIOS Not able to post the Termainal log, as this disk is not supported by PC3000 and Salvation Does any body have any suggestions/workarrounds to get the data out ? Note I’ve seen similar posts for the same

Q: ST3500320AS 7200.11 … fried.

I’m hoping nothing else has What are my options? Could I replace that diode? Specs sticker – ST3500320AS S/N 9QM37GWF P/N 9BX154-303 FIRMWARE SD15 DATE CODE 08401 SITECODE KRATSG WWN 50000C5000CC11B84 on the PCB – PCB 100466725 REV A DLAJ-4 GTC 12 V-0 0807-74-02

Q: A few Seagate Barracuda questions

Anyways, I digress So this maxtor basics drive has had 20 into its 12v socket; do I bother buying her an e-sata enclosure and putting the mech in it, or is it sure-fire that the mech PCB is cooked too and needs replacing? The code on it is PCB 100466725 REV A DLAJ-4 A barcode sticker on the pcb reads 100468974 H M839S9Z5 Thanks for reading guys

Q: is the pcb worth changing? found one realy similar? 7200.11

that on other threads, but now, i came a cross this pcb Seagate ST3500320AS Barracuda 720011 HDD PCB/Logic Board The Hard Disk Drive is not include Main Controller IC ST V523C HDD Motor Combo IC 100369972 Cache Memory 16MB Board Number 100466725 Firmware SD15 Tested and Working on the following HDD- Seagate ST3500320AS Barracuda 720011 500GB SATA HDD Model ST3500320AS P/N 9BX154-303 Firmware SD15 Date Code 09245 Site Code KRATSG now this is my hard drive model ST3500320AS

Q: Wanted: new PCB for crashed seagate 7200.11 500gb

Hi, I am looking for a replacement PCB for Seagate Barracuda 720011 500GB ST3500820AS Firmware SD25 PCB board details are PCB 100466725; Rev A DLAJ-4 I tried looking around Google, and some PCB companies I am awaiting for their replies But nowhere to find the exact copy of mine I only found some PCB’s for a ST3500 32 0as with a firmware SD 15 They say i can buy this and only need to change the ROM-chip on the PCB for it

Q: looking for barracuda 500G 7200.11 “100466725”

Thanks

Q: Small Lot of Seagate 500GB Donor Drive

500GB ST3500418AS 5VM8ARDK HP34 WU 100535704 REV B Seagate 720012 500GB ST3500418AS 5VMJD5Q1 HP35 WU 100535704 REV B Seagate 720012 500GB ST3500418AS 5VMJD3M0 HP35 WU 100535704 REV B Seagate 720011 500GB ST3500620AS 5QM1Z5RT DE12 WUXISG 100466725 REV A Seagate 720011 500GB ST3500620AS 9QM78HVB DE12 KRATSG 100466725 REV A Seagate 720011 500GB ST3500620AS 9QM287WE SD25 KRATSG 100466725 REV A Seagate 720011 500GB ST3500620AS 9QMAZ275 HP26 TK 100466725 REV A Seagate 720011 500GB ST3500620AS

Q: Maxtor STM3500320AS overheat fail? (Newbie.)

files on I would like to recover It’s a Maxtor DiamondMax 22 (720011) STM3500320AS S/N 9QM7X9ZX P/N 9GT154-325 Firmware MX15 (Updated to MX1A) Date Code 09146 Site Code KRATSG (Korat Thailand) PCB info TOPSEARCH 94V-0 TS-M-8V01C SG PCB 100466725 REV A DLAJ-4 Barcode 100468974 J 7913VCRN CPU (ST) V523C SEAGATE DAZZ001TQ 9E812049 990CY MYS 8U 835 RAM (Samsung) K4H561638J-LCCC Motor drive (ST) SMOOTH 100501286 AAAAX V5 Now the problems About a year back i had the BSY bug for the

Q: DiamondMax22 fw MX1A strange PCB – terminal log TetonST Boot

Hello, i’ve this DiamondMax22 STM3500320AS which has an inusual PCB 100475720, usually this kind of hdd have pcb 100466725 o Terminal log Rst 0x20M F3 T>/2 F3 2>Z LED000000CE FAddr00259C49 Rst 0x20M F3 T>/1 F3 1>N1 LED000000CE FAddr00289139 I swapped the pcb with 100466725 and did ROM transfer, log is the same But if i insulate both HDA and motor contacts, this is the log Bogus ISR Bogus ISR Bogus ISR Bogus ISR TetonST

Q: seagate barracuda 7200.11 HEAD REPLACEMENT

headstack to get it working again can someone tell us what headstack will work with this hard drive no problem enclose is the information SN 9QM37EEP P/N 9BX154-303 FIRMWARE SD15 DATE CODE 08402 SITE CODE KRATSG PRODUCT OF THAILAND PCB 100466725 REV A BAR CODE 100468974 J

Q: Seagate 7200.11 500gb – was dead, now spinning up & clicking

of song projects, remixes, multitracks and acapellas, masters and other irreplacable audio I have written, produced or collected and that is irreplaceable to me The drive Seagate Baracuda 720011 500gb S/N 5QM0C2GH ST3500820AS Firmware SD45 pcb100466725 reva This drive was housed in an external case branded Medion HDDrive 2 GO which has both USB and STA ports on it What happened The Seagate had been sat on top of my main PC for a long time As my music PC had died I bought a 2nd hand dual

Q: DATA RECOVERY HELP FOR A BARRACUDA 7200

Greetings Gurus, New member here hoping for some expert advice on how to recover data from a bad HDD HARDWARE DETAILS OEM Internal 500GB Primary Master IDE HDD Seagate Barracuda 720011 ST3500620AS DE13 PCB 100466725 manufactured March 2012 for Dell Studio Slim 540s SYMPTOM On boot up, Windows 7 SMART error auto detected the bad HDD through the SELF MONITORING SYSTEM that reported a “parameter has exceeded its normal operating range” SMART reported Primary Master

Q: Barracuda 7200.11 ST3500820AS 9BX134 bios swap question

is the donnor drive When only value is mentioned, it is the same for both drives Brand Seagate Serie Barracuda 720011 Model ST3500820AS P/N 9BX134- 505 9BX134- 511 Firmware SD 25 SD 36 Date Code 09215 08393 Site Code KRATSG PCB 100466725 REV A DLAJ-4 Main chip from defective drive LSI TTB5501D Seagate 0841T 1701717 35MM001 4082356 Main chip from donnor drive ST V523C Seagate DAZZ001TQ 9E745105 AA147 TW 99 807 My main concern is about the different main chips , as well

Q: ST3500320AS with SD45 fw update problem

Hi,I have this drive with SD45 firmware (Google shows that this fw is usually paired with ST3500820AS) and it shows unknown cache size – a known issue with these drives having SD04 firmware, which the drive originally had according to the label. PCB no. is 100466725. I wanted to update to SD1A as recommended by Seagate, but having different (than expected by the update) firmware, the procedure fails. Is there a way to force the update or any other suggestions? Thanks in advance.

Q: Please help with Barracuda 7200.11 500 Gb

data is recoverable, at least some First of all this is the Hard Disk Drive info Seagate Barracuda 720011 500 Gb S/N 9QM ST3500620AS P/N 9BX144-505 Firmware SD25 Date Code 08396 CSO 1106-5 WWN 5000C50009F4F280 Site Code KRATSG PCB 100466725 REV A DLAJ-4 The problem with this hard drive was that the BIOS recognized it but indicated 0mb, I tried to recover it with the “0 LBA” method, however the BIOS no longer recognizes it, I do not know what happened or what I did

Replacement Seagate PCB 100466725:

To repair a failure board, the simple way is swapping the failure board with a replacement board. Donor boards on HardDriveParts.com are listed below:

Contact US

If you have any questions, please feel free to contact us: sales@harddriveparts.com

Comments are closed.