Seagate PCB 100724095 Failure

Seagate PCB 100724095 Failure

PCB failures (Such as Seagate PCB 100724095) affect thousands of hard drives every year and often result in permanent data loss. A hard drive may suddenly fail to power on, and a computer may not detect that it is plugged in. Some failed hard drives will also show up in computer BIOS with incorrect brand/model information. PCB failures can also cause physical issues such as read/write head failures, and many PCB failure symptoms overlap with the symptoms of other physical hard drive issues.

Some emails from customers of Seagate PCB 100724095 failures are listed below, along with tips for replacing & repairing.

Seagate PCB 100724095 Failures:

Q: DIAGNOSTIC PORT LOCKED for New ST2000DM001 pcb: 100724095

New seri seagate desktop hdd is terminal locked. i can get F3 T> diagnostic port locked. only working clear smart and clear NRG command. how to access terminal??? . any solution for this problem??

Q: ST2000DM001 pcb: 100724095 terminal locked?

ST2000DM001. PN: 1ER164-301. pcb: 100724095 terminal locked?. fw: cc25. date 15161, 15141. How to access terminal?. “diagnostic port locked” Thanks. Phil. ps: old drive is ok

Q: 100724095 Short Channel

Can anyone help to identify the SHORT POINT of this PCB please?

Q: Seagate ST1000DM003 – not detected in Bios

Hi! It’s my first post here, sorry for my english ) Seagate ST1000DM003 PN 1ER162-300 FW CC43 Board number 100724095 rev A The drive is not being detected by Bios When connected to terminal, HDD allow me to log in to the console, I can switch between levels, but I can’t do anything else Drive doesn’t respond to commands like SpinDown, Translator repair, etc Boot 0x40M Spin Up Trans Spin Up SpinOK TCC001F SNOOOZZZZZZEEE

Q: Pensioner plugs wrong power into ex hdd

?not work i am wondering if to try replacing the PCB? On the back of the drive itself,but unsure if this is the way to go If it is i am confused of the exact component to get,or indeed where from here is all the info i have Seagate ST2000DM001 100724095 GTC18V-0?? C-1432=03-22 (Two digits i cannot read) i am based in the UK England,so if its the last straw i will get it done by whoever you can recommend,but would very much like to try to fix it myself as a challenge thank you Fredrick

Q: Seagate 1 TB Hard disk not detected in Bios – No power input

Hello ThereI’ve a Hard drive of Seagate – ST1000DM003-1ER162-300 – it is not working. There is no symptom of power input too. – Hard Drive was cold and no rotation was sensed in motor.What would be the issue. If I replace the PCB 100724095 will this help to access the hard drive ?Support me on this.RegardsAnandh G

Replacement Seagate PCB 100724095:

To repair a failure board, the simple way is swapping the failure board with a replacement board. Donor boards on HardDriveParts.com are listed below:

Contact US

If you have any questions, please feel free to contact us: sales@harddriveparts.com

Comments are closed.