PCB failures (Such as Seagate PCB 100760718) affect thousands of hard drives every year and often result in permanent data loss. A hard drive may suddenly fail to power on, and a computer may not detect that it is plugged in. Some failed hard drives will also show up in computer BIOS with incorrect brand/model information. PCB failures can also cause physical issues such as read/write head failures, and many PCB failure symptoms overlap with the symptoms of other physical hard drive issues.

Some emails from customers of Seagate PCB 100760718 failures are listed below, along with tips for replacing & repairing.

Seagate PCB 100760718 Failures:

Q: Samsung ST1000LM025 USB TO SATA

Model ?ST1000LM025 ?PN:/HN-M101ABB/EXA. CPU :88I9422-NDB2 ?. USB Chip: JMS577. PCB Info :100760718 rev.c replace to sata ?CPU:88I9422-NDB2. PCB info : 100720903 04 PCB label Rev.7

Q: Samsung USB to SATA PCB Compatibility

Hello,Samsung USB to SATA PCB Compatibility USB -> SATA100725482 -> 100720903 ..known 100740633 -> 100739392 .. known 100760718 Rev C -> ?????PCB no 100760718 Rev Cunable to read Sectors Please reply .Regards,Alex

Q: Samsung USB to SATA PCB Compatibility

Samsung USB to SATA PCB Compatibility USB -> SATA100725482 -> 100720903100740633 -> 100739392100760718 Rev. C – > ?????unable to read Sector .Please reply.Regards,Alex

Q: PCB 100760718 REV. C Help

Hello, just need some help with a PCB board I am attempting to fix I have a 100760718 REV C pcb that is from a student’s hard drive where I work (Seagate ST1000LM025 / HN-M101ABB/ESA) The pcb usb 30 micro port was completely busted and now I had attempted at a donor pcb 100720903 03 and I have swapped the firmware chip but the drive doesn’t spin at all The main chip above firmware chip does get warm when

Q: Seagate Expansion Portable Drive not detected

I would like to try a bit different approach, and some extra information is needed The drive information is SEAGATE (SAMSUNG) model SRD0NF1 / 1TB Disk PN HN-M101ABB/ESA REV A F/W 2BA30003 05/2016 Controller board with embbeded USB bridge 100760718 REV C The disk spins up, but with NO led blink at all, and no recognizable heads movement (also no click-of-death) Windows does not recognize the unit, although some moves are sensed on Device Manager, but with no conclusive results My

Replacement Seagate PCB 100760718:

To repair a failure board, the simple way is swapping the failure board with a replacement board. Donor boards on HardDriveParts.com are listed below:

• Seagate PCB Board 100760718
• Seagate ST1000LM025 PCB Board 100760718