Toshiba PCB G3448A Failure

Toshiba PCB G3448A Failure

PCB failures (Such as Toshiba PCB G3448A) affect thousands of hard drives every year and often result in permanent data loss. A hard drive may suddenly fail to power on, and a computer may not detect that it is plugged in. Some failed hard drives will also show up in computer BIOS with incorrect brand/model information. PCB failures can also cause physical issues such as read/write head failures, and many PCB failure symptoms overlap with the symptoms of other physical hard drive issues.

Some emails from customers of Toshiba PCB G3448A failures are listed below, along with tips for replacing & repairing.

Toshiba PCB G3448A Failures:

Q: 2 MQ01UBD100 with different PCBs

Turns out my friend’s MQ01UBD100’s PCB (g003250a) is broken I read in this same forum something about the usb 20 of macbook pros breaking some of these boards, and that’s exactly the laptop he’s got Anyways I installed my MQ01UBD100’s PCB (g3448a) on the disk and nothing happened And my question is, is there a way to get it to work? I already bought the g003250a board from china but it takes 40 days to arrive or so and my friend needs the data for work so if there’s a way to get my

Q: SATA PCB for Toshiba G3448A ?

I have a client HDD Toshiba MQ01UBD100 with USB 3.0 PCB (G3448A)I need compatible SATA PCB , does anyone suggest one ?

Q: Lost Toshiba ROM ??

I have MQ01UBB200 with G3448A PCB and I desoldered the ROM to transfer it to a compatible SATA PCB, but unfortunately I Lost the ROM ???is there a way around it ? please help

Q: First timer repairing a MQ01UBD100.

usb HDD and I’m trying to fix it I just wanted to make sure that I have a plan in place that is actually possible Any help would be appreciated This is the drive Model MQ01UBD100 HDD Code HDKBD29AYA31 T Firmware AB00/AX101U PCB Revision G3448A The light powers up, but there does not seem to be any spin from the drive itself I have read that it’s possible that this is mechanical malfunction because she told me that she dropped it in the past, but we’re probably not going to pay $1k

Q: Toshiba MQ01UBD100 (1TB USB 3) not detected but spins

Hello to all, I’ve been reading over the forums, but I didn’t find similar symptoms as my drive This is the drive Model MQ01UBD100 HDD Code HDKBD29AYA31 T Firmware AB00/AX101U PCB Revision G3448A Symptoms The drive spins but the SO doesn’t detect it In particular on linux machine if I do “dmesg” on terminal I get [ 7852284225] usb 3-1 new full-speed USB device number 6 using xhci_hcd [ 7852396267] usb 3-1 device descriptor read/64, error -71

Q: TVS Diode location on Toshiba Canvio PCB G3448A

Hi,I have a power dead Toshiba Canvio 1TB external drive and was hoping someone could point out the location on the PCB of the TVS diode (fuse) so I could short it and get my data back.Here is the PCB reference ?… ct_id=1163Any help is appreciatedThanksPat.

Q: Toshiba MQ01UBD100 reads on head0 only via PBA

Hello, i’ve this Toshiba MQ01UBD100 usb drive that i need to clone I converted usb pcb G3448A to sata by using sata donor G003235B G3448A -> G003235B I already cloned surface 1 – 2 – 3 without any problem in sata mode, but i can’t clone any single sector on surface 0 (SATA, UDMA, PIO mode don’t work) I thought it was bad head 0 (or at least very weak head), but if i turn off technology mode on toshiba

Q: Toshiba MQ01UDB100 swap from USB to SATA

Hi everyone Guru here! I need to swap a G3448A PCB from USB conection to SATA, in order to read a HDD I already?ve read some post about it (at this forum) but i?m still have doubts I know what capacitors must remove, but i have no idea of were to sold (and the order) of SATA wires I ?ve read something about sold them at the MCU side, but i still don?t know how to do it Please, can some

Q: Toshiba Hard Drive PCB Swap Replacement G3448A

I have to swap PCB for this HDD, with PCB G3448A. I know I have to swap Bios Chip, but I don’t know if I have to change both chips shown in the picture attached ( or just one of them. In that case, which one?

Replacement Toshiba PCB G3448A:

To repair a failure board, the simple way is swapping the failure board with a replacement board. Donor boards on HardDriveParts.com are listed below:

Contact US

If you have any questions, please feel free to contact us: sales@harddriveparts.com

Comments are closed.