WD PCB 2060-701265 Failure

WD PCB 2060-701265 Failure

PCB failures (Such as WD PCB 2060-701265-*** (2061-701265-***)) affect thousands of hard drives every year and often result in permanent data loss. A hard drive may suddenly fail to power on, and a computer may not detect that it is plugged in. Some failed hard drives will also show up in computer BIOS with incorrect brand/model information. PCB failures can also cause physical issues such as read/write head failures, and many PCB failure symptoms overlap with the symptoms of other physical hard drive issues.

Some emails from customers of WD PCB 2060-701265 failures are listed below, along with tips for replacing & repairing.

WD PCB 2060-701265 Failures:

Q: What to match for WD PCB replacement?

Hi all,I am just wondering which numbers must definitely match to swap a PCB on a WD2500JB drive.The model no is WD2500JB-55GVC0, the PCB ID is 2061-701265-200. I am prepared to swap the serial flash ROM to the donor PCB and would do so with other components if necessary.But first I need to identify a suitable donor. Anyone?regards

Q: Need PCB for WD1600JB-00GVC0

Model: WD1600JB-00GVC0Date: 05 APR 2005DCM: DSBHNTJAHBoard No: 2061-701265-200 AFDoes anyone know if it’s critical that the “AF” match?Thanks

Q: WD PCB needed 2061-701265-200 AJ

for a WD2000JB-00GVC0 drive.dcm DSCHCTJAH.thanks

Q: Wanted PCB for WD2500BB-98GUA0

Hi, I desperately need to get the data from this drive. I’m guessing that the PCB has died but nothing seems to have burned out. I tried another WD PCB and the drive spins but obviously is not readable without the correct PCB. Other info on the drive is as follows: Date: 31 Jul 2004, DCM: HSCACTJAA, on the PCB itself: 2060-001266-001 REV A, on the Barcode: 2061-701265-200 AL XC1X68 AWBY 6 0005380 6385. Thanks in advance for any help.

Q: Close enough match? WD2500JB – 00GVC0

hard drive due to the overheating The details of the original drive are as follows Brand Western Digital Model WD2500JB – 00GVC0 Product of Thailand Manufacture Date 23 March 2006 Logic Board Number (on the white printed sticker) 2061 – 701265 – 200 AL Logic Board Number (printed on the PCB itself) 2060 – 701265 – 001 Rev A DCM DSBHCTJAH Now I’ve managed to track down a similar drive with the following details Brand Western Digital Model WD2500JB – 00GVC0 Firmware 0802D08

Q: WD1200JB-22GVC0 SE

DRIVE NO SUCCESS A GUY IN THE USA SAID IT’S SIMILIAR TO WD1200JB-00GVC0 WE BOUGHT SUCH DRIVE, SWAPPEED THE MBO CLICKING NOT WORKING DOES ANYBODY HAVE A GOOD SUGGESTION, AND/OR SIMILIAR WD1200JB-22GVC0 DCM CODE=HSCACTJCA P/N OF MBO 2061-701265-200 TKS VERY MUCH FOR YOUR HELP EPHRAIM

Q: Sunlight killed the radio star? WD2000 & WD2500 both dead

was the culprit Does this make sense? And if so – can a simple PCB swap fix this? Thanks in advance HH Details Drive 1 WD2500 WD Cavier SE – EIDE MDL WD2500JB – 75GVCO (O or 0 not sure) DATE 14 Jul 2005 DCM DSCHCTJAH PCB sticker 2061-701265-200 AH PCB board 2060-701265-001 REV A Drive 2 WD2000 WD Cavier SE EIDE MDL WD2000JB-00GVC0 (again not sure if o or 0) DATE 29 Jul 2005 DCM HSCHNTJAH PCB sticker 2061-701265-200 AH PCB board 2060-701265-001 REV A

Q: westerd digital burnt board

hi. i have a model: wd2500jb-98gvcodcm: dsbhctjahpcb no: 2060-701265-001 rev a the board is burnt… i have donor drivemodel:wd2500jb-oogvcodcm: dscactjahpcb no: 2060-701265-001 rev a i have salvation docotor and comass.i copied the rom file from the good drive and wrote it to the deffective drive. it is spinning but clicking. it is not coming to ready. any idea? i need the data on the drive.

Q: WANTED: PCB for WD2500JB-00GVC0

of diagnosing the PCB without having another to swap and try? I’m an Automotive Electrician by trade so i have access to quality meters and tools if need be details are as follows MDL WD2500JB-00GVC0 Date 26 Apr 2005 DCM DSBHCTJAH 2061-701265-200 AH XC 1X47 0Q8H B 0006430 5436 Is there anything different between an IDE drive and a SATA drive other then the pcb? I have a SATA version of this drive i bought at the same time for another machine, but im not too keen to try the board

Q: search for WD2000JB-00GVC0 PCB

I’m searching for the same pcb on wd2000jb-00gvc0-electronic-board-t8192.htmlthe code on the ide connector is 2061-701265-200-ag, the biggest chip on the pcb is coded wd70c26pcb code on circuit 2060-701265-001 rev a hard disk made on april 2005.thank youAldo

Q: PCB WD2500BB Wanted

Hi all! I’m looking for a working PCB for my WD2500BB.WD P/N: WD55BB-55GUC0Form Factor: 3,5″Code on PCB: 2060-701265-001 Rev ACode on sticker: 2061-701265-002 AHMain controller WD70C26 – GP v2.1Motor controller L6283 v1.3Thank You in advance

Q: WD1200JB-00GVC0 – need PCB

PCB burnt out after power source faillureBrand: Western DigitalModel: WD1200JB-00GVC0Product of ThailandManufacture Date: 01 May 2005.Logic Board Number (on the white printed sticker): 2061 – 701265 – 200 AH.Logic Board Number (printed on the PCB itself): 2060 – 701265 – 001 Rev A.DCM: HSBACTJAHCan u help me pls? Do I need exact PCB?

Q: Looking for WD1600JB-00GVC0 PCB

Hi, ?I am looking for a replacement PCB for this WD Caviar SE model: MDL: WD1600JB-00GVC0DCM: HSCHNTJAHDate: 09 JUN 2005Made in ThailandPCB #: 2060-701265-001 REV AThanks a lot.

Q: WD1600JB-75GVCO; DCM: HSBHCTJCH – PCB match Qs

the PCB code (both etched and on white label) don’t match How close do DCM and PCB code need to match to revive her HDD? The HDD was in Dell Dimension 8110 PC – etched PCB code 2060-701-265-001 REV A; white barcode label (by IDE pins) 2061-701265-200 Thank you very much Arthur

Q: WANTED: WD1600JB-75GVCO; DCM: HSBHCTJCH 2060-701-265-001 REV

She recently started a new job and several presenatations that she worked on for about a week are on that drive She’s devastated The HDD was in Dell Dimension PC – etched PCB code 2060-701-265-001 REV A; white barcode label (by IDE pins) 2061-701265-200 Thank you very much Arthur

Q: wd2500jb-22gvco HDD failed- HELP

Hello Everybody,I’m very new to Forum’s, and not sure of the etiqet (sorry).Can someone please help me? my WD2500JB has failed.On board chip U1 burnt out. How can I retrieve data on HDD to another HDD.If card replacement needed, any idea where I can get one from, and how much?Drive details are:MDL: wd2500jb-22gvcodate: 8 May 2005DCM: HSBACVJAHDetails on PCB:2060-701265-001 REV ASticky label says: 2061-701265-200AHMany Thanks,Papasmurf

Q: WD1600JB – needs PCB replace

but then the adapter blow out and the disk too The disk smells suspicious and when I remove PCB, there are some burned parts (U5, U7, Q1 and L1) as cen be seen on attached picture My HDD MDL is WD1600JB-00GVC0 DCM HSBANT2CA PCB label is 2061-701265-200AL I bought donor PCB (not HDD) with the same first part of the label, but the secont part differs after XC 1X68 I have replaced PCBs and turn on the disk, but the heads just clicks and nothing hapened May be I have to replace U12? Or

Q: WD1200JB – 00GVC0 board needed

MDL WD1200JB – 00GVC0 DCM DSCHCTJAA Sticker 2061-701265-200 AH Board 2060-701265-001 REV A I read that there were other compatible boards for this drive? I would like to find the exact right board (or definitely compatible) for an easy swap without changing anything More details Drive appears dead, no sign of life, happened when local PC shop hooked it up to transfer data! Had a quick look

Q: WD2500JD Spins Up, Clicks, Spins Down

Removed from external enclosure, inserted into PC with IDE slot and power supply Same result MP3 of spin up click https//soundcloudcom/josh-winslow/wd2500jd-click Specs MODEL WD2500JB-00GVC0 Date 24 MAR 2006 DCM DSCHCTJCH Sticker 2061-701265-200 AL XT 1×68 CLDK 1 0001380 6 381 Thoughts? The data is important but the company does not have the budget to pay for professional repairs What are the chances of it being a bad board? If we can’t replace the board to hope to fix it, and

Replacement WD PCB 2060-701265:

To repair a failure board, the simple way is swapping the failure board with a replacement board. Donor boards on HardDriveParts.com are listed below:

Contact US

If you have any questions, please feel free to contact us: sales@harddriveparts.com

Comments are closed.