WD PCB 2060-701292 Failure

WD PCB 2060-701292 Failure

PCB failures (Such as WD PCB 2060-701292-*** (2061-701292-***)) affect thousands of hard drives every year and often result in permanent data loss. A hard drive may suddenly fail to power on, and a computer may not detect that it is plugged in. Some failed hard drives will also show up in computer BIOS with incorrect brand/model information. PCB failures can also cause physical issues such as read/write head failures, and many PCB failure symptoms overlap with the symptoms of other physical hard drive issues.

Some emails from customers of WD PCB 2060-701292 failures are listed below, along with tips for replacing & repairing.

WD PCB 2060-701292 Failures:

Q: Table for all WD Marvell PCB’s

… 001130 Mammoth – 001292 Saber53 PATA – 001252 Saber53 SATA – 701335 Saber58 Unicom Hawk – 701292 Saber53 PATA Starling – 701393 Raider – 701383 Zeus – 701474 HUlk –

Q: i need data sheet of hdd wd800bb 2060-701292-002

salam alekm hello iam trying to replace burned ic from this pcb with new one but it burnes the new one i want the data sheet to measure every thing good

Q: lets talk more about problem of wd800bb power ic burning

salam alekm (hello but in islam) if you mean that the ic on head is bad i tink it maybe bad and may not as when i try other pcb of similar type and let me explain to you all the problem here in egypt most of hdd wd800bb 00jhc0 with pcb 2060-701292-002 burnes the power ic or most of pcb and wd800bb 00jha0 with pcb 2060-001292-000 dosent burn much like the first one we use the jha0 pcb insted of the burned one of jhc0 we switch rom and all things is good but still the bios recognize the

Q: how to change 2060-701292-002 with 2060-001292-000 ?

salam alekm hiwhat i want is change burned pcb 2060-701292-002 with good 2060-001292-000 and this what i do1- i change the rom from bad pcb to good pcb2- i switch the pcbs but still hdd read as sabre or mamothand what i want is change 701292-002 with 001292-000 and get right firmware in bios so that i was asking is there any thing other rom i must move from bad pcb to the good one to get right firmwareplease add me maxword5 hotmail.com

Q: what is tvrs d5 d6 in wd800bb 2060-001292-000

salam alekm hellowhat is tvers d5 d6 in wd800bb 2060-001292-000 that is additional different from 2060-701292-002

Q: wd800bb 00jhc0 and 00jha0 and fja0 burns much in egypt

salam alekm here in egypt pcb of wd800bb serial 2060-701292-xxx and 2060-001292-xxx power ic burns toooooooooo much we try to solder new one but most of times it burnes again so i think that all may help by giving advices about this pcb and i will start some friend from egypt told me before desolder the old burned power ic i must measure some and it must be as i will say r45 and c81 must be open

Q: Western Digital PCB board

We selling Westerd Digital PCB Board NEW 2060-701292-002 IDE / 2060-701335-005 SATA/2060-701385-001 SATA NEW CONDITION , Supplying large quantity of Hardisk Drive PCB Board, Bearing, NEW plate,Packaging Equipment Antistatic and Polyform BOx , Defective Factory Hardisk Drive with 80% Repairable (Most Reject Form HDD manufacture-some minor problem) visit our website wwwsepangnetcom or

Q: HEllp can pcb for 00fja0 work on 88jhc0

how can i see replace hdd with its pcb by pcb from different model and it work good ,isee wd800bb-88jhc0 power ic(L6283 1.3) 2060-701292-000, its pcb replaced by 2060-001130-012 and work so the hdd now model is wd800bb-88jhco and it have pcb 2060-001130-012 so ho it can?i saw many with this so how?, i saw many hdd replace pcb by another and it work?? so any onw explain me

Q: Read/Write Serial Flash on WDC Logic Boards

Hi,Method for Reading/Writing serial flash ROM on WDC Logic Boards…Tested on:2060-001159-006 REV A2060-701292-000 REV A2060-001293-001 REV A2060-701335-005 REV A…Method not work with “Mammoth” boards… :cry:Mikippp

Q: WD2500JB-00REA0 only reconized in device management

read any sectors ! All appairs to be bad (HDtune, HDD scan,DFT Hitachi, MHDD, HDAT, DLG DIag) There is no failure sounds I found exactly the same drive and try to swap PCB it didn’t work, drive isn’t reconized in bios My PCB on paper 2060-701292-C00 on PCB 2060-701292-002 PCB with worked HDD on paper 2060-701292-C00 on PCB 2060-701292-001 I swap U12 firmware from my PCB to new PCB and plug this new PCB on my HDD It works ) but 😉 I have the same pb HDD is only listed

Q: Need WD1600JB-00REA0

Hi guys,I’m looking for the pcb or hard driveHere the specs of the dead drive (Chip motor control is burn)MDL: WD1600JB-00REA0DATE: 26 JUN 2006DCM: DSBHCT2CHPCB CODE: 2061-701292-C00CPU: 88i6540-LFH1CHIP MOTOR CONTROL: L6283 1.3FIRMWARE CHIP: 25P10VPThanks to allJoJo

Q: PCB Needed for Western Digital part#: wd1600jb-00REA0

Let me know if you have a working PCB for this model:Western Digitalp#: wd1600jb-00REA0dcm: dsbhntjch 2061-701292-c00 afPlease msg me if you have this part. Thanks.

Q: REQESTING WD800JB ATA/EIDE PCB

WD800JB-00JJC0DATE:07-12-2005DCM:DSCACTJAAPCB:2060-701292-000 REV A

Q: Need PCB WD WD2500JB

Seems to be a bit on the scarce side, but I need pcbPCB number 2060-701292-001ThanksDuncanUK

Q: PCB for WD2500BB-00RDA0

Hi to all. Something happened with the HDD and I need to change the PCB. The details of the HDD areWD2500BB-00RDA0DATE: 06 APR 2006DCM: D8BHCTJAHPCB: 2061-701292-B00 AA XW 3D03 1RY3 9 0007400 6407I would appreciate your expert opinions on my problem.Thank you in advance

Q: PCB for WD2500BB-00RDA0

Hi to all. Something happened with the HDD and I need to change the PCB. The details of the HDD areWD2500BB-00RDA0DATE: 06 APR 2006DCM: D8BHCTJAHPCB: 2061-701292-B00 AA XW 3D03 1RY3 9 0007400 6407I would appreciate your expert opinions on my problem.Thank you in advance

Q: PLEASE HELP!!!

a new board to put in I have found one on , but the numbers are a little different, i was wondering if someone could tell me if it would work i have wd2500jb-00rea0 Date 10 mar 2007 dcm hbbhnt2ahn number printed on sticker on board 2061-701292-c00 AH xc 3e22 3fde 5 0002360 7362 number etched on the board 2060-701292-002 REV A the on on wd2500jb-00rea0 date 08 apr 2007 dcm hsbhct2can number printed on sticker 2061-701292-c00 AH xc 3e22 1wsp 7 002390 7392 number etched on

Q: HOW TO FIND THE CORRECT PCB FOR WESTERN DIGITAL HARD DISK?

Hi,I have a doubt here..To find a match pcb for Western Digital, do we have to find exactly the same number from the barcode sticker or just from the number printed on the pcb?For example : number from the barcode sticker : 2061-701292-000 AKnumber printed on pcb : 2060-701292-000 REV ASo, which one I need to use?Thanks.

Q: WD800 replacement motherboard

Western Digital WD800, I need to replace the motherboard for model # WD800BB-00JHC0 hard drive disk, motherboard # 2060-701292-000 REV A, can anyone help? My son may be able to replace if I can find one, thank-you.

Q: PCB for WD1600JB – 00READ

Looking for a working PCB for WD1600JB – 00READ10 SEP 2006DCM: HBCHCT2AHNPCB: 2061 – 701292 – C00 AEHope this is enough information to find an apropriate PCB.Have a drive here which spins on, clicks 3,4 times, spins off and on againclicks again 2,3 times, spins off again – after 3rd time it remains off.It is not recognised in BIOS.Thank you for any sugestion.+++

Q: HD PCB Dead 🙁

Looking for a replacement PCB. 2060-701292-001. That’s all the info I have. Please respond

Replacement WD PCB 2060-701292:

To repair a failure board, the simple way is swapping the failure board with a replacement board. Donor boards on HardDriveParts.com are listed below:

Contact US

If you have any questions, please feel free to contact us: sales@harddriveparts.com

Comments are closed.