WD PCB 2060-701384 Failure

WD PCB 2060-701384 Failure

PCB failures (Such as WD PCB 2060-701384-*** (2061-701384-***)) affect thousands of hard drives every year and often result in permanent data loss. A hard drive may suddenly fail to power on, and a computer may not detect that it is plugged in. Some failed hard drives will also show up in computer BIOS with incorrect brand/model information. PCB failures can also cause physical issues such as read/write head failures, and many PCB failure symptoms overlap with the symptoms of other physical hard drive issues.

Some emails from customers of WD PCB 2060-701384 failures are listed below, along with tips for replacing & repairing.

WD PCB 2060-701384 Failures:

Q: Looking for WD1500ADFD

Looking for something closerWD1500ADFD-00NLR0Date: 24 Dec 2005DCM: HBCA2AB2060-701384-002 revp1Thanks

Q: Raptor PCB required

Hi,I need to borrow/buy a good PCB for a Raptor WD1500AHFD-00RAR1PCB p/n is 2060-701384 REV ACheers!!Sean

Q: WD800ADFD needed

Prefer WD800ADFD-xxNLR1Need PC board: 2061-701384-800 Working condition preferred w/ good modules. Media defects OK.Pls. PM me. Thanks.Jon

Q: WD1500ADFD PCB swap / firmware transfer

Hey everyone, I have the following drive that suddenly died while in use (freeze, then blue screen) WD1500ADFD-00NLR1 18 JUN 2006 PCB 2060-701384-002 REV A sticker 2061-701384-800AB XW3A12KASV200035006503 After powering off and restarting, the drive no longer spun up and wasn’t recognized by the BIOS I located a similar drive on WD1500ADFD-00NLR1 09 APR 2006 PCB 2060-701384-002 REV A sticker 2061-701384-890AE XW3A130RW2100063506356

Q: Need PCB for WD1500ADFD

Looking for PCB with model no. 2061-701384-800

Q: wd740adfd (raptor) pcb swap

Hi,I’ve a wd740adfd-00nlr1 (raptor) with dead pcb (probably motor ship), there’s a short around D3, but pcb still shorted when D3 removed. Pcb is 2060-701384-002I’ve also a donor with same model & dcm, but pcb number is 2060-701453-000 revA.And another one with pcb 2060-701384-002, but model is wd3600adfd-00nlr1.I have swaped U12 chip, tried with both PCB, not working. On these models should I also swap memory chip??Is there another way to solve this DR case??

Q: Western Digital Raptor 150GB (WD1500ADFD) recovery possible?

trashing it Any suggestions on what the problem with this drive might be? It powers up but won’t communicate My first thought was that the board might be bad I was only able to find one other drive on the web that has the same “2060-701384-002 REV P1” etched on the PCB I didn’t notice anything noticably burnt or damaged It hasn’t been dropped or anything Should I try just cleaning the PCB surface? What are the odds that swapping the PCB would fix my problem? Do I have

Replacement WD PCB 2060-701384:

To repair a failure board, the simple way is swapping the failure board with a replacement board. Donor boards on HardDriveParts.com are listed below:

Contact US

If you have any questions, please feel free to contact us: sales@harddriveparts.com

Comments are closed.