WD PCB 2060-771761 Failure

WD PCB 2060-771761 Failure

PCB failures (Such as WD PCB 2060-771761-*** (2061-771761-***)) affect thousands of hard drives every year and often result in permanent data loss. A hard drive may suddenly fail to power on, and a computer may not detect that it is plugged in. Some failed hard drives will also show up in computer BIOS with incorrect brand/model information. PCB failures can also cause physical issues such as read/write head failures, and many PCB failure symptoms overlap with the symptoms of other physical hard drive issues.

Some emails from customers of WD PCB 2060-771761 failures are listed below, along with tips for replacing & repairing.

WD PCB 2060-771761 Failures:

Q: Solder SATA Adapter to USB Drive (2060-771761-001)

Hi,. I’m looking for some assistance.. What are the SATA adapter connections to be soldered on this USB drive ?. My Drive Model = WD10TMVW PCB = 2060-771761-001 Rev.P1 Cheers!

Q: List of compatible SATA PCB for 2,5″ USB drives

USB – SATA 701605 – 701499 701615 – 701499 701635 – 701572 701650 – 701499 701675 – 701672, 701609, or 771672 771737 – 701692 or 771692 771754 – 701692 or 771692 701754 – 771692 771761 – 771692 771801 – 771823 771814 – 771820 771859 – 771852 771949 – 771959 or 771939 771961 – 771960, 771939, or 771959 771962 – 771931 or 771959 771817 – 771820 800041 – 800022 800038 – 800025 800069 – 800066 800067 – 800065 810012 – 800022 If somebody knows another compatible …

Q: Looking for a SATA compatible PCB to replace USB PCB

Hi everyone,Firstly thanks for looking.As the subject says I am looking for a SATA compatible PCB to replace a USB PCB for a little project im doing. I know I could solder a SATA connection & remove the capacitors but want to only do that if I cant get a compatible SATA PCB.The USB PCB is from a WD USB3 My Passport Essential 2060-771761-001 REVAIf anyone has a compatible SATA PCB to sell me please PM me ?ThanksLoki

Q: WD Smartware USB 2 and 3 PCB`s for SALE/TRADE

Guys,i have stock of those WD Smartware PCB`s for SALE/TRADEUSB2 & USB3 – All TypesSamples here:771737771801771761771754701675and more least 70-80p from each (some are even more), wanna get rid of those and sell them or trade them with 3.5″ WD, Hitachi, Samsungif anyone is interested PMthnx

Q: WD Elements SE USB 3.0 500GB Drive stopped spinning

it!!! How terrible of WD what a shit drive (sorry lol) Anyways, I have reason to believe the PCB is faulty as I don’t think its the actual drive itself Here are some tech specs Actual drive inside closure WD5000BMVW – 11AMCS2 Model of PCB 2060-771761-001 REV P1 This drive doesn’t have a USB to SATA connector, its all integrated therefore it being a native USB HDD The drive is detected on computer, but not on My Computer Its detected in Disk Management albeit with a capacity of 0MB (presumably

Q: I need help from a PCB expert | Does this revision matter?

Right I have a wd hard drive it failed on me.I have two of the same hard driveFailed hdd pcb no. is: 2060-771761-001 REV P12nd identical hdd pcb is: 2060-771761-001 REV AWould the Revision code make a difference? Everything looks identical including the chip numbers etcSay if i was to swap the 2nd pcb onto the first hdd, would it work?Thanks

Q: western digital mypassport fail

one week old if that i got everything map out but i dont know what the data connection pins are on the drive would anyone know what these are for this type of version enclose is the information thank you WD5000BMVW- 11AMCS2 Circuit board 2060-771761-001 REV A

Q: U12 Chip on replacement PCB is bigger! HELP!

Hi guys I bought the exact same model number PCB for my hard drive (2060-771761-001 P1) and the U12 chip is bigger on the new PCB Before you ask, I have had it professionally diagnosed my hard drive and the old PCB is confirmed to be dead Upon closer inspection, I can see that theres a small sticker on the pcb’s and the new pcb doesn’t exactly match it although the the PCB’s look 100% identical to each

Q: wd10tmvw-11zsms4 safe mode ?

Hello all , i would appreciate if some1 can point me to how to enter safe mode on this drive .. pcb#2060-771761-001many thnaks in advance

Q: WD500BMVW-11AMCS2 (passwoport usb3)

Hello to all,The disk drive had a fall while it was pluged. Now the drive trying to spin but going to a repeating sound with the led blinking all the time. The pcb is 2060-771761-001. Any help would be greatfull. Thx.

Q: Western Digital -> Compatiable USB To SATA Boards

Hello , Can We Have a Single thread with most of tested boards .The information here is so scattered and waste a lot of time .I will update the first thread once More Information is trickled out .I would also Like To Find SATA Replacement For The Under PCB .I Am Easily Tab Points and Use a SATA Connector But i am Inclined To Get a SATA Board . Drive ” WD5000BMVW-11AMCS2 ” : USB ” 2060-771761-001 Rev A” > SATA ” ? “

Q: Strange case today

Hello! I found this case is strange to me so I would like to share it with you WD10TMVW-11ZSS4 / PCB 771761 The led blinks but no power on at all I suspect ( PCB – Pre-amp – Scratches to the surface ) After replacing PCB’s no spin up So it’s (Pre-amp and/or Scratches ) After opening the drive I found no visible scratches ( at least on the top side ) I suspect Pre-amp so I replaced heads from matched donor After heads

Q: WD Passport USB transfer to compatible SATA Circuit PCB

need to switch WD USB to SATA PCB data recovery Today me share the following model compatible PCB SATA 701605 – 701499 701615 – 701499 701635 – 701572 701650 – 701499 701675 – 701672, 701609, or 771672 771737 – 701692 or 771692 771754 – 701692 771761 – 771692 771801 – 771823 771814 – 771820 771859 – 771852 771949 – 771959 or 771939 771961 – 771960, 771939, or 771959 771962 – 771931 or 771959 771817 – 771820 800041 – 800022 701675-001 – 701672-001 External ROM 88I9045-TJF2 701675-001 – 701609-004

Q: HSA compatibility 1TB WD Passport

I have a WD10TMVW-11ZSMS4 with bad heads My potential donor -11ZSMS5 Both DCMs xxxT2xx, DOM 3 mo apart, same mfr site Should be fine right? Here’s the catchpatient PCB is 771761, donor is 771814 The obvious difference is the motor controller IC and associated circuitry This is either the first time I’ve run into, or the first time I’ve noticed this difference between a patient and donor that meets all the standard matching criteria I am inclined

Q: Western Digital USB-SATA PCB Package

DFL is offering a package containing “all the compatible SATA PCBs for the most common USB PCBs including USB PCB 701605, 701615, 701635, 701675, 771737, 771754, 771761, 771801, 771814, 771817, 771859, 771961, 80038, 800041(3TB)” https//wwwdolphindatalabcom/product/western-digital-usb-sata-pcb-package/ Anyone have any thoughts or input about this? Seems like it may be a good deal if these are actually the most common boards I’m still waiting

Q: wd5000BMVW 11amcs2 don’t work

solution? Thanks a lot I have sent to ask for a plate to replace the bios but if someone knows how to locate those points I would first try to directly solder the usb on the plate, but I cannot find the scheme on any website placahddrotojpg 2060-771761-001 REV P1 the same like this thx 4 all

Replacement WD PCB 2060-771761:

To repair a failure board, the simple way is swapping the failure board with a replacement board. Donor boards on HardDriveParts.com are listed below:

Contact US

If you have any questions, please feel free to contact us: sales@harddriveparts.com

Comments are closed.