WD PCB 2060-771962 Failure

WD PCB 2060-771962 Failure

PCB failures (Such as WD PCB 2060-771962-*** (2061-771962-***)) affect thousands of hard drives every year and often result in permanent data loss. A hard drive may suddenly fail to power on, and a computer may not detect that it is plugged in. Some failed hard drives will also show up in computer BIOS with incorrect brand/model information. PCB failures can also cause physical issues such as read/write head failures, and many PCB failure symptoms overlap with the symptoms of other physical hard drive issues.

Some emails from customers of WD PCB 2060-771962 failures are listed below, along with tips for replacing & repairing.

WD PCB 2060-771962 Failures:

Q: WD USB drives

Hi I’m having some cases with 2,5″ USB drives, that I can’t ID directly thru USB on UDMA.. I get messages that HDD’s RAM cannot be read, etc.. Some I can read by terminal.. But now I have a new model (WD5000LMVW-11VEDS6) which PCB (2060-771962) I can’t connect by terminal.. Why these messages of HDDS RAM, error, etc? Bad PCB’s?? Thanks

Q: wd usb elements 2060-771962 compaitable sata pcb?

I have wd usb elements wd5000lmvw -11veds6. . It has pcb 2060-771962.. which sata pcb compaitable with it?

Q: List of compatible SATA PCB for 2,5″ USB drives

… 701650 – 701499 701675 – 701672, 701609, or 771672 771737 – 701692 or 771692 771754 – 701692 or 771692 701754 – 771692 771761 – 771692 771801 – 771823 771814 – 771820 771859 – 771852 771949 – 771959 or 771939 771961 – 771960, 771939, or 771959 771962 – 771931 or 771959 771817 – 771820 800041 – 800022 800038 – 800025 800069 – 800066 800067 – 800065 810012 – 800022 If somebody knows another compatible boards, please write it here in this topic.

Q: WD USB drives

HiI’m having some cases with 2,5″ USB drives, that I can’t ID directly thru USB on UDMA.I get messages that HDD’s RAM cannot be read, etc.Some I can read by terminal.But now I have a new model (WD5000LMVW-11VEDS6) which PCB (2060-771962) I can’t connect by terminal.Why these messages of HDDS RAM, error, etc? Bad PCB’s??Thanks

Q: WD Passport USB transfer to compatible SATA Circuit PCB

– 701499 701635 – 701572 701650 – 701499 701675 – 701672, 701609, or 771672 771737 – 701692 or 771692 771754 – 701692 771761 – 771692 771801 – 771823 771814 – 771820 771859 – 771852 771949 – 771959 or 771939 771961 – 771960, 771939, or 771959 771962 – 771931 or 771959 771817 – 771820 800041 – 800022 701675-001 – 701672-001 External ROM 88I9045-TJF2 701675-001 – 701609-004 No External ROM 88i8946-TJF2 701609-000 – 701675-001 Good luck

Q: replace drive from broken WD USB drive using SATA disk

Passport Ultra Disk from this drive is clickling So I would like replace this disk using SATA disk So I have very good drive with sata PCB interface WD5000LUCT-63C26Y0 PCB2060-771959-000 rev A USB damaged drive is WD5000LMVW-11VEDS6 PCB2060-771962-000 REV P1 So I replaced PCB and ROM chip between both disks Now good disk with USB PCB is recognized by Windows But in device manger when I tried incialize drive then I have error Input/Output Could you help me what I should do to using

Q: Invalid geometry after pcb swap

WD hdd has 771959 sata board and works perfectly. Trying to test a 771962 usb board coming from a faulty drive (all heads gone). The sata hdd with the usb pcb is detected in device manager but fails to show up in disk management. Victoria says invalid geometry and 0 size. Can somebody explain why this happens and how to fix geometry?

Replacement WD PCB 2060-771962:

To repair a failure board, the simple way is swapping the failure board with a replacement board. Donor boards on HardDriveParts.com are listed below:

Contact US

If you have any questions, please feel free to contact us: sales@harddriveparts.com

Comments are closed.